Jewelry Welding Machine Portable Jewelry Tool for Gold Silver Platinum 500W 50A

Jewelry Welding Machine Portable Jewelry Tool for Gold Silver Platinum 500W 50A


Description
With the development of technology, the spot welding machine has become a tool that people often need to use in their lives. With a host, tungsten needle, foot pedal, fixture, comfortable handle, pedestal, and long power cord, this machine is an ideal choice for you.

Details
Top Handle Strap: It allows you to carry this machine to various work sites just as easily as carrying a briefcase.

Anti-slip Feet: Four non-slip feet can provide additional support to better maintain the stability of the product, raise the bottom to avoid moisture, and protect your countertop from scratches.

Heat Dissipation Holes: The heat-sink holes on three sides of the machine ensure quick heat dissipation, protect the machine from burning, and allow for stable&continuous welding.

Application
It is used for the rapid welding of platinum, gold, K-gold, silver, copper, and iron, as well as precision welding of metal wires such as round ends, elliptical buckles, and fine wires. It is suitable for glasses repair, jewelry, tin toys, handicrafts, dentures, metal wires, DIY, orthodontics, etc.

How to Use
1. Tighten the nut when the output cable is connected to the output pole.
2. Clamp the workpiece on the black output cable near the tungsten needle with the fixture (Usually the distance between the tungsten needle and the workpiece is 0.5 to 1.2mm.).
3. Fix the welding position and move the foot pedal to produce a high-temperature arc between the workpiece and the tungsten needle.

Specification
Color: Blue
Model: DH-670
Material: Metal
Process: Baking Paint
Drive Type: Foot Pedal
Assembly Required: Yes
Shape: Rectangular
Plug: US Standard
Power Source: Corded Electric
Power Form: Pulse
Power: 500W
Voltage: 110V
Current: DC 50A
Max. Welding Diameter: 0.5-1.2mm/0.02-0.05in
Product Size: 21.5*30*14.5cm/8.46*11.8*5.7in
Package Size: 41*23*17cm/16.14*9.06*6.69in
Gross Weight: 5.7kg/12.57 lbs

Package Included
1* Spot Welding Machine
1* Foot Pedal
1* Pedestal
1* Handle
1* Power Cord
1* Fixture
1* Tungsten Needle
1* English Manual

Notes
1.Please check whether the power supply matches the voltage. The machine power supply should be plugged into the primary power supply socket, not into the secondary power supply socket (e.g. electric plug).
2.The welding test must be tested on the weldment. Please try to avoid triggering the switch without the weldment. During the welding test, the current should be adjusted from small to large.
3.During the welding process, the workpiece must not be located in the tip of the tungsten needle or step on the pedal, which may lead to a short circuit of the machine.
4.Two electrodes and welding needles should not touch each other to avoid short circuits. Please do not step on the pedal for too long, just step on it once and then start immediately, otherwise, it will be easy to short-circuit.
5.Please don't put the machine in a wet place and please keep it dry. Please do not touch it with wet hands. Please have the machine maintained by professional workers.
6.Strong light will be released when welding. Please wear protective glasses (not included) and do not look directly at the welding part when welding.