FEMPRXZ 2 Set of - Wheel Hub and Bearing Assembly Front Side Polished Protected Steel with ABS Sensor Lugs for Nissan for Rogue 2.5L 08-13 for Rogue Select 2.5L 14-15 for Sentra 2.5L 07-12

Fitment
for Nissan
for Rogue 2.5L 2008-2013
for Rogue Select 2.5L 2014-2015
for Sentra 2.5L 2007-2012Every set can be described as following: Wheel Hub And Bearing Assembly Front Side Polished Protected Steel With Abs Sensor 5 Lugs 2.5L ECCPP065917
---------------------------------------------------------------------------------------------------------

Item_Offered: Bolt Quantity: 5: 1 X wheel bearing: 29
Note: Failure To Separate The Front Wheel Sensor From The Steering Knuckle May Result in Damage To The Front Wheel Sensor: Do Not Pull On Wheel Sensorharness
Material: Steel
Appearance: Polished, Protected
Placement On Vehicle: Driver Side Or Passenger Side Front
Specification: Weight: 6LB
Part_Number: ECCPP065917
Caution: Do Not Reuse The Wheel Stud: Do Not Reuse The Cotter Pin: Clean The Mating Surfaces Of The Joint Sub-Assembly And The Wheel Hub And Bearing. Apply Lubricant To The Surface (A) Of The Joint Sub-Assembly: Hold The Wheel Hub And Bearing Using A Suitable Tool. Tighten The Wheel Hub Lock Nut: Since The Drive Shaft Is Assembled By Press-Fitting,Use A Torque Wrench To Tighten The Wheel Hub Lock Nut. Do Not Use A Power Tool: Too Much Torque Causes Axle Noise. Too Little Torque Causes Wheel Bearing Looseness. Tighten The Wheel Hub Lock Nut To The Specification: When installing a the cotter pin (1) and the nut retainer (2),securely bend the cotter pin to stop rattles: Align The Matching Marks (A) On The Disc Brake Rotor And On The Wheel Hub And Bearing
Exploded View: Wheel Hub And Bearing: Cotter Pin: Nut Retainer: Wheel Hub Lock Nut: Splash Guard
Inspection After Removel: Check Components For Deformation
ABS Sensor: Has ABS With Tone Ring Sensor
Bolt Circle Diameter: 4.46 in