Description:
With a huge thrust, a sturdy and powerful propeller, and precise speed control, the outboard engine is a good helper for your water work. Its two-stroke motor, flexible steering, easy operation let you sneak up on fish, outdoor adventure, etc. with the best speed and low noise. This outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc.
Specification:
Brand: HANGKAI
Gear Positions: F-N-R
Ignition System: CDI
Cooling System: Water-Cooling
Control System: Tiller Control
Starting System: Manual Start
Control System: NO.92 Lead-Free Gasoline
Recommended Propeller Range: 3-9"1/4''x8"
Recommended Lubricant: 2 Stroke Lubricating Oil
Cylynder: 2
Trim And Tilt System: Manual Tilt
Standard Fuel Tank Capacity: 24L/6.34gal
Displacement: 246cc
Gear Ratio: 2.08(27:13)
Max.Output(Kw): 13.2
Max.Speed(r/Min): 4500-5500
Mixing Ratio: Fuel:Oil=50:1
Size and Weight:
Transom Plate Height: 45cm/17.72in
Bore x Stroke: 5.6*5cm/2.20x1.97in
Product Size: 78.3x33.2x105.3cm/30.83x13.07x41.46in
Net Weight: 38.6kg/85.10lbs
Gross Weight: 49.5kg/109.13lbs
Package Size: 133x71x38.5cm/52.36x27.95x15.16in
Motor Details
The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material, thus providing a quieter working environment.
The three-blades propeller with a streamlined design provides you with greater power.
The beam clamping is easy to twist, and the disassembly and assembly are easy.
Loosen the clamping to hang the outboard on the Hanging board.
Used for acceleration or deceleration of outboard engine.
Adjust the tilt slightly to adjust the tilt angle of the machine
Used to control the ship's direction of travel.
The manual start function allows you to operate easily by pulling the start rope and opening the speed switch on the handle.
We have equipped the motor with a large capacity of 24L/6.34gal fuel tank, So you don't need to purchase additional oil pipes and fuel tank!
How to Use !
1.Fill the gear oil (open the gearbox lid and fill the gear oil).
2.Fill NO. 92 petrol in the motor and press the oil pump lightly 6-10 times.
3.Fill engine oil and don't exceed the head of the pattern.
4.Turn the throttle to the start-up and turn the accelerator gets up to 50%.
5.You should pull the starter line quickly.
6.After the motor starts, please turn the throttle to a running state.
7.Then, you can operate the motor now.
Don't do the following will avoid cylinder Scoring !
1.Start the motor in the water.
2.Use the motor when it stop cyling water.
3.Even if you want test the motor, it should be done in the river!
4.When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
5.Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. Our outboard motor doesn't with oil of gear, please prepare it by yourself.
