Hero image 0 of Holley Sniper EFI 550-510-3PX-SBF Sniper 2 EFI Bundle with HyperSpark Ignition System, 0 of 3
Holley Sniper EFI 550-510-3PX-SBF Sniper 2 EFI Bundle with HyperSpark Ignition System
(No ratings yet)
Check if this fits your vehicle
Key item features
- Sniper 2 Kit:
- Power Distribution Module (PDM) was designed to keep your installation stress free by listing a wiring diagram to connect your system to the dedicated circuits
- HyperSpark Ignition:
- Sniper 2 Bluetooth module turns your iOS or Android smartphone into a tuning and monitoring interface with a base map to get started and no laptop required
- Billet aluminum construction unit plugs directly into the main harness and features a Hall Effect crank trigger for a noise free RPM signal to the ECU
- Available with or without fuel system, the complete fuel system consists of 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, fuel pressure regulator, filters, necessary hardware, and bulkhead fitting to return fuel into the tank
- Patented clear installation cap eliminates confusion while installing the distributor with a marking indicator
- Only (4) wiring connections required; the Battery+, Battery-, Switched Ignition, and RPM
- Geometrically redesigned throttle shaft and plate for a smoother throttle feel
- Next generation ECU features improved RF noise and interference resistance (protects against outdated car wiring, noisy alternators, faulty plug wires, etc.)
- Ignition box keeps all the features of its predecessor in a smaller and lighter design, providing a clean installation, precise timing control, and consistent spark energy from idle to redline for optimal performance
- Supports up to 650 hp naturally aspirated or 575 hp boosted with (4) 100 lb./hr. injectors
- Sniper 2 EFI Bundle includes a Power Distribution Module (PDM), HyperSpark 2 ignition box, coil, and a Chevrolet or Ford distributor (depending on your application)
- Cast-in fuel crossover from the primary to secondary fuel rail
- Integrated transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications (Sniper 2 Transmission Control Kit and vehicle specific harnesses not included, both available separately)
- Integrated ignition coil bracket simplifies mounting the ignition coil while delivering up to 150 mJ of spark energy per second from idle to redline
Specs
- Manufacturer part number550-510-3PX-SBF
- Vehicle model550-510-3PX-SBF
- Vehicle makeChevrolet, Ford
- Vehicle fitment typeSpecific
- Automotive parts divisionPerformance
- BrandHolley Sniper EFI
Current price is USD$2,049.95
Price when purchased online
- Free shipping
Free 90-day returns
How do you want your item?
Plus, get 50% off an annual plan at checkout!
Ships to
Arrives by Tue, Jul 7
Sold and shipped by Walmart.com
Free 90-day returns
More seller options (1)
Starting from $2,561.99
Hurry —get 50% off a year of Walmart+
Exclusions, T&C apply. Ends 7/5. Claim offer
About this item
Product details
The #1 selling EFI conversion just got better…again! We’re bundling our top selling Sniper 2 packages and passing along maximum savings! Available for small block Chevrolet, big block Chevrolet, and 8.2-inch deck small block Ford (5.0 base), these kits include a HyperSpark distributor, HyperSpark coil, and a HyperSpark 2 ignition box. Coupled with a 3.5” or 5" color LCD touchscreen handheld, Power Distribution Module (PDM), and either a base or master (in-line fuel system) Sniper 2 kit, these are the most complete Sniper EFI conversion kits ever offered by Holley. The PDM module was specifically designed to provide the easiest wiring experience for Sniper 2 kits that are paired with a HyperSpark ignition. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screws. Battery power, ground, and a switched 12V source are all that's required from your vehicle to power the PDM and your Sniper 2 system. Make your classic drive like a modern fuel injected vehicle, including better cold starts, smooth drivability, and improved fuel economy. Sniper 2 was designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manuals and online videos. The handheld user-friendly setup wizard has you answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI system. Take complete control and make the conversion to EFI with a Sniper 2 EFI HyperSpark Ignition bundle.
- Sniper 2 Kit:
- Power Distribution Module (PDM) was designed to keep your installation stress free by listing a wiring diagram to connect your system to the dedicated circuits
- HyperSpark Ignition:
- Sniper 2 Bluetooth module turns your iOS or Android smartphone into a tuning and monitoring interface with a base map to get started and no laptop required
- Billet aluminum construction unit plugs directly into the main harness and features a Hall Effect crank trigger for a noise free RPM signal to the ECU
- Available with or without fuel system, the complete fuel system consists of 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, fuel pressure regulator, filters, necessary hardware, and bulkhead fitting to return fuel into the tank
- Patented clear installation cap eliminates confusion while installing the distributor with a marking indicator
- Only (4) wiring connections required; the Battery+, Battery-, Switched Ignition, and RPM
- Geometrically redesigned throttle shaft and plate for a smoother throttle feel
- Next generation ECU features improved RF noise and interference resistance (protects against outdated car wiring, noisy alternators, faulty plug wires, etc.)
- Ignition box keeps all the features of its predecessor in a smaller and lighter design, providing a clean installation, precise timing control, and consistent spark energy from idle to redline for optimal performance
- Supports up to 650 hp naturally aspirated or 575 hp boosted with (4) 100 lb./hr. injectors
- Sniper 2 EFI Bundle includes a Power Distribution Module (PDM), HyperSpark 2 ignition box, coil, and a Chevrolet or Ford distributor (depending on your application)
- Cast-in fuel crossover from the primary to secondary fuel rail
- Integrated transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications (Sniper 2 Transmission Control Kit and vehicle specific harnesses not included, both available separately)
- Integrated ignition coil bracket simplifies mounting the ignition coil while delivering up to 150 mJ of spark energy per second from idle to redline
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Specifications
Manufacturer part number
550-510-3PX-SBF
Vehicle model
550-510-3PX-SBF
Vehicle make
Chevrolet, Ford
Vehicle fitment type
Specific
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Warranty url
Warnings
Warning Text
California Proposition 65
WARNING: WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
