6x 9005+H11+5202 LED Headlight Bulbs High or Low Fog Light Front For GMC Canyon 2015-2019

Specifications:
Plug Type: 9005 + H11 + 5202
Usage: Headlight+Fog light
LED Quantity(each bulb): 4-Pcs
Luminous Flux: 9000lm/set
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: 6500K (Headlight)-6000K(Foglight) White
IP67 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius

Two-way heat dissipation channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2. High speed mute fan(12000R/Min),high Air flow for faster cooling rate

Package Included:
2 x 9005 LED Headlight High Beam Bulbs
2 x H11 LED Headlight Low Beam Bulbs
2 x 5202/H16 LED Fog Light bulbs

Installation Notes:
1. Asa safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs.Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp.

Note:
--No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!
--When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage.
--The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall.