Parameter:
Voltage: 220V
Main motor power: 0.37Kw
Water pump power: 0.04Kw
Maximum rotation diameter of the tool: 360mm
Grinding wheel speed: 3500r/min
Grinding knife lifting height: 200mm
Grindable saw blade size: Φ90-Φ630mm
Tool holder stroke: 285mm
Grinding wheel rotation angle: ±45°
Grinding wheel specification: 10mmXΦ32mm(Φ16mm) XΦ150mm
Lighting specification: 24v-20w
Attention
1.After each shift is completed, please clean the track and worktable,remove stains from the tool holder shaft, worktable, and adjustment carriage, and apply engine oil to prevent rusting.
2.Oil should be added to the track every shift, as a knife grinder is a relatively precise blade grinding machine. Therefore, it is necessary to maintain the cleanliness of the track and knife holder shaft when using it.
3.When lifting and lowering the spindle, please pay attention to releasing the locking handle, and each adjustment part should be filled with lubricating oil every shift. The lifting column should not stay in a certainplace for a long time, and should be lifted and lowered several times frequently.
4.After each use, make sure to place the workbench in the middle and do not push the workbench too hard to avoid deformation of the track due tolarge impact forces.
5.The equipped protective cover must be used to ensure the safety of the machine tool and the operator.
6.Individuals who are not familiar with the structure and performance of this machine tool are not allowed to operate to avoid accidental damage to the machine too.
Note: The power cord needs to be provided by the customer, and the machine is only a test line.
Item included(153211):
Techtongda Universal Cutter Grinder 220V
