Dwellnix High-efficiency foam cutting machine with stainless steel column, 0.01" precision wire, adjustable cutting angle, quick heating for accurate cuts, perfect for DIY projects

• Build to Last: It is made of high-quality multilayer board and stainless steel column, which is wear-resistant and rust-resistant, and can be used for a long time.
• High Efficiency: It adopts electric heating wire cutting, and can heat the wire to the required temperature in about 0-5 seconds so that you can quickly and smoothly cut the foam and improve work efficiency.
• Precision Cutting: The worktable is carefully designed with scales on all four sides to allow you to accurately measure each piece of material, and the 0.01" heating wire design allows for more accurate cutting and less error, as well as a lower rate of wastage.
• Adjustable Design: You can adjust the desired temperature between 32℉ to 572℉ by turning the voltage adjustment knob of the adapter. The cutting height, width, and radius of the cutting circle can also be adjusted, allowing you to achieve precise cutting results.
• Enjoy DIY: By adjusting the angle of the support, you can change the position of the wires and cut different shapes of materials, you can easily get cones, squares, cylinders, and other kinds of irregular shapes to fully enjoy the fun of DIY.
• Simple Operation: This product has a simple operation method and a 15.35*12.99-inch workboard, which is suitable for both beginners and professionals to use easily.
• Rubber Foot Pads: They can be slightly adjusted to ensure stability while protecting the table from being scratched.
• Guide Ruler: The stainless steel guide ruler can help you make straight cuts.
• LED Display: The adapter has an LED display that shows the voltage value in real-time for better control of the cutting process.
• Wire Storage Wheel: The large wire storage wheel can store up to about 65.61ft of heating wire, so you can finish your cutting work without having to replenish the wire frequently.
• Material: Multilayer Board, Stainless Steel, Aluminum Alloy
• Color: Light Blue, Silver
• Mount Type: Countertop
• Assembly Required: Yes
• Plug Type: US Standard
• Power Supply: Corded Electric
• Adapter Input: 100-240V
• Voltage: 18V
• Power: 72W
• Preheating Time: 0-5 Seconds
• Cutting Height: 0-25cm/0-9.84 in
• Cutting Width: 0-28cm/0-11.02in
• Cutting Diameter: 0-19cm/0-7.48in
• Heating Wire Diameter: 0.28mm/0.01in
• Adjustable Temperature Range: 0~300℃/32~572℉
• Adjustable Bracket Angle Range: 30-90°
• Power Cord Length: 2.5m/8.2ft
• Workboard Size: 39*33cm/15.35*12.99in
• Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in
• Gross Weight: 3.3kg/7.27 lbs
• Net Weight: 3kg/6.61 lbs

Notes

• Please read the manual completely before installation and use.
• Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid
• scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.
• Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.
• Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.
• Please note that it is not suitable for fireproofing materials. When cutting, the cutting wire temperature is high, and attention should be paid to keeping away from flammable and explosive products.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.