Wildnix Push Lawn Mower, 43cc Engine, 1.25kw Power, High-Speed 8500r/min, Two Blade Heads for Multi-Purpose Use, Easy to Carry, Safe, Efficient Heat Dissipation

Description
Our weed wacker is powered by fuel for high power and safety. Two blade heads are available to meet your multiple-use needs. It starts up universally with two-stroke engines, so you can get to know how to use it quickly and accurately. It will be your powerful mowing assistant to help keep your lawn and garden neat and beautiful!
Details
Large Fuel Tank: The 33.8 oz large capacity fuel tank ensure long-term use without frequent refueling.
Grass Baffle: It can effectively prevent the broken grass from splashing around when mowing the lawn, thus making it easier to clean up the lawn after mowing and ensuring your safety.
Funnel: The red funnel makes it easier to add fuel and less likely to leak.
Specification
Color: Red, Silver
Material: PP, Aluminum Alloy, Manganese Steel, Nylon
Assembly Required: Yes
Usage: Side-mounted
Displacement: 43CC
Power: 1.25kw
Rotation Speed: 8500r/min
Engine Type: Single-cylinder Air-cooled 2-stroke Gasoline Engine
Carburetor Type: Diaphragm Carburetor
Gasoline Oil Mixing Ratio: 20-25:1
Idling Speed: 2800-3200r/min
Fuel Tank Volume: 1000ml /33.8 Oz
Operating Noise: About 110db
Engine Size: 26*22*27cm/10.24*8.66*10.63in
Product Length: 1.75m/5.74ft
Gross Weight: 9kg/ 19.84 lbs
Package Size: 107*27*27 cm/42.13*10.63*10.63 in
Package Included
1 * Weed Wacker
1 * Oil Pot
1 Pair* Goggles
1 * Funnel
1 * Carrying Strap
1 * English Manual
All Accessories for Installation
Notes
The oil mixture ratio should not be wrong or deviated. Please do not use poor-quality motor oil as the matching motor oil.
Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use.
Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.
The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.
Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.
The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.
The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.
Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.
If you do not use the machine for more than 10 days, please pour out the oil in the gasoline and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration.
If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.
When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.