Fluke FLK-T5-600 Electrical Tester Flat

The Electrical Tester is a versatile troubleshooting tool you can carry to every job site. Use it to check voltage, continuity, and current, all with one compact, rugged tool. Just select volts, ohms, or current and the tester does the rest.

The trendsetting OpenJaw design allows for fast and easy current measurement, safely and without metallic contact to a live conductor. The integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester would be able to.

Voltage tests are faster and easier than ever before. Just turn the knob to voltage (V) and place your leads on the test points. The T5-600 auto-selects either AC or DC voltage, depending on what is detected. This meter is suitable for both residential or commercial applications and is designed to keep you safe with a CAT III 600 V rating.

• Electrical Tester Flat
• Measure current up to 100 A without breaking the circuit
• Meter automatically selects AC or DC voltage, up to 600 V
• Resistance measurements up to 1000 O plus continuity test
• Work in tight spaces with detachable SlimReach probe tips
• Withstand a 10 ft. (3 m) drop
• Conserve battery life with auto-off mode
• Fit in one hand with handy probe storage in the back of the holster
• Accept Fluke accessory test clips with the test leads

• Jaw Opening: 12.9 mm (0.5 in)
• Max Wire Size: 1/0 THHN Cable
• Current Range: AC rms 0 to 100.0 A
• Accuracy AC current (50/60 Hz): 3% ± 3 counts
• AC Response: Averaging
• Voltage Range: AC/DC 0 to 600 V
• Resistance Range: 0 to 1000
• Operating Temperature: -10°C to 50°C
• Storage Temperature: -30°C to 60°C
• Operating Altitude: 2000 meters max
• Temperature Coefficient: 0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
• Size: 30.5 x 51 x 203 mm
• Battery Type: 2 x AA
• Weight: 1.04 lbs