Surface Extension Kit - 72"W x 16"D

When building storage, even when you know what you’re doing, it will teach you things after it’s installed. Whatever you've built always fills up way faster than anticipated and then you end up learning about the gap you didn’t plan for after it's finished—whether it's because of different bins, bags, sports gear, tools, or the need for more hanging space.

To change that problem and "add on" sections to traditionally built wall shelving probably means you're tearing into something that already looks pretty finished. Which makes small changes turn into a remodel, so people just live with the mistake and stare at it every day.

The Toden Extension Kit is the no-remodel fix. Remove the end cap on an existing Toden row, slide the extension sleeves into the hollow cores, add the new 6-foot surface slides right into place, and you can use the same end cap again. Your storage gets longer—cleanly, modularly, and without extra tools.

• Extend shelving that’s already installed — add length without rebuilding the run
• No tools required for the connection — sleeves slide into the hollow core for a solid join
• Keeps the finished look — end cap off → extend → end cap back on
• Adds more accessory space — more usable run for Storage Hooks and Closet Rod Brackets
• Heavy-duty components — built to match the strength and intent of the Toden system

• You installed “enough”… then life/gear changed
• You have an installation over 6 feet
• You’re expanding storage (sports, yard tools, seasonal, kids)
• You need more run length for hooks or hanging accessories
• You want to store above a workbench, freezer, or parking bay

1. Remove the end cap from the installed Toden surface run
2. Insert the 3 extension sleeves into the hollow-core ends of the existing surface
3. Slide on the new 6-foot surface to extend the row
4. Add the 2 wall brackets to support the new section
5. Reinstall the end cap to finish the end clean

• Adds: 1 additional 6-foot section to an existing installed Toden shelf
• Connection: 3 extension sleeves slide into the hollow core of the Toden surface already installed
  
• System fit: Designed specifically for Toden surfaces (this is an add-on, not a stand-alone shelf) and comes with necessary wall brackets

What’s included

• 1 × 6-foot Toden surface
• 3 × Extension sleeves
• 2 × Wall brackets

Load ratings (per component)

• Surface: 1,200 lbs
• Wall brackets: 600 lbs each
• Extension sleeves: 1,000 lbs each

Do I have to take my existing shelves off the wall to extend them?
No—this kit is designed to extend a row that’s already installed by working from the end cap.

Do I need tools?
Not for the sleeve connection, bracket connection, or end cap. You will need to mount the added wall brackets like any shelf bracket install, 4 screws - just like last time.

How much length does one kit add?
One kit adds 6 feet to a single row.

Can I keep extending after that?
Yes—stack additional Extension Kits to keep growing the run to meet your changing needs.

Does extending help with accessories?
Yes. A longer row gives you more usable space for snap-in accessories like Storage