Makita HR4002 1-9/16 In. SDS-Max Keyless 10.0-Amp Electric Hammer Drill

Powerful 10 AMP motor delivers for the most demanding applications One-touch sliding chuck for quick and easy bit changes Dual mode operation Rotation with hammering and Hammering only make this tool Soft grip helps reduce the level of vibration felt by the end-user No Hammering when idling increases the tool life and performance Side Handle (158131-0) D-Handle (419868-7) Depth Gauge (321248-4) Plastic Carrying Case (158275-6) Grease (181573-3) 1-Year Limited Factory Warranty Powerful 10 AMP motor delivers 4.6 . of impact energy to handle the most demanding applications 2-Mode operation for Hammering Only or Hammering with Rotation Rubberized ergonomic soft grip provides more comfort No hammering when idling functions helps increase tool life One-touch sliding chuck for quick bit changes Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling 12-Bit angle settings allow the bit to be set at different positions for operating convenience Automatic brush cut-off protects commutator from damage for longer tool life 12-Bit angle settings allow the bit to be set at different positions for operating convenience Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life INCLUDES (1) Side Handle (158131-0) (1) Depth Gauge (321248-4) (1) Hammer Bit Grease (194683-7) (1) Plastic Tool Case (158275-6) AMPS: 10 Capacity (concrete drilling): 1-9/16 Capacity (concrete drilling w/ core bit): 4-1/8 Impact Energy (Joules): 6.2 J Impact Energy ( .): 4.6 . Vibration (m/s²): 17.5 Blows Per Minute: 680 BPM No Load Speed: 2, 500 RPM Overall Length: 18 Cord Length (ft): 9.8' Bit Type: Accepts SDS-MAX