Hero image 0 of Electric Brick Wall Chaser Concrete Cutter Notcher Groover 4800W Molding Slotting Machine, 0 of 8

Electric Brick Wall Chaser Concrete Cutter Notcher Groover 4800W Molding Slotting Machine

(No ratings yet)

Key item features

High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
Adjustable Slotting: It can accommodate up to 7 5.23-inch blades, and the cutting depth and width can be adjusted by changing the size and number of blades with a maximum of 1.61" in depth and 1.65" in width. You can adjust the blade according to your needs to cut a more suitable area.
Ergonomic Design: The front auxiliary handle is 180° adjustable and the rear main handle is 90° rotatable, together with optimized weight distribution that gives you better control while cutting, allowing you to find the most comfortable angle for labor-saving operation and meeting different work requirements without scraping your hands when slotting into the corners.
Dust-free Cutting: The water pump with a 19.68ft hose can supply water quickly, improve cutting efficiency, reduce dust splashing during cutting, lower the temperature of the saw blade while extending its service life, and protect the user's health. You can also adjust the water flow through the outflow head.
Convenient Storage&Carrying: The equipped professional toolbox and 13.6 lbs lightweight allow for convenient and effortless storage and carrying.
Safe to Use: The leakage protection device on the power cord, self-locking switch, and blade protective cover can all protect your safety and effectively prevent accidents from happening. You only need to loosen the screws, flip the movable cover outward, and then tighten the screws to adjust the protective cover.
Laser Positioning: The laser function provides guidance for cutting in the correct direction, allowing for straighter lines and more accurate cutting work.
Carbon Brush Replacement: The carbon brush is designed to the side for easier replacement when needed, effectively ensuring the efficiency and service life of the machine.
Complete Accessories: The five saw blades of 5.23" in diameter can be interchangeably adjusted to improve work efficiency. The practical installation tools help you use this machine with less time and effort.

Details

Heat Dissipation Holes: The heat dissipation holes can effectively discharge the heat during operation and extend its service life.
Extended Power Cord: A 9.8ft power cord allows you to expand your work range, eliminating the need for frequent socket changes.

Specs

Brand
Unbranded
Power type
Corded Electric
Charger included
N
Volts
110 V
Amps
2 Amps
Watts
4800 Watts

Current price is $138.40

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

2-Year Plan - $15.00

3-Year Plan - $22.00

How do you want your item?

Columbus, 43215

Arrives by Sat, May 9

Sold and shipped by Loma Co. Ltd

3.704626334519573 stars out of 5, based on 281 seller reviews(3.7)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Difficult slotting work can easily be frustrating. But with the help of a good tool, your work will be much easier. This molding slotting machine is lightweight and efficient, making it your ideal choice! With a 4800W all-copper motor with a speed of 6500rpm and high-strength blades, it can easily cut concrete walls, red bricks, wood, etc., bringing more convenience. With many practical accessories and user-friendly designs, this machine is convenient, simple, safe, and healthy to use. Have it to facilitate your slotting work now! It is suitable for professional or daily home users such as electricians, plumbers, contractors, and those with strong hands-on abilities. It can be used to cut granite, porcelain, concrete, marble, red brick, sand brick, cement blocks, asphalt, stones, etc.

Specifications

Color: Black, Red, Grey

Material: Diamond Alloy, Aluminum, Plastic

Motor Type: Pure Copper

Plug: US Standard

Power Source: Corded Electric

Surface Recommendation: Wall

Number of Items: 1

Power: 4800W

Voltage: 110V, 50/60Hz

No Load Speed: 6500RPM

Adapter Model: GA1220

Adapter Input: 110V

Adapter Output: DC12V, 2A

Power Cord Length: 3m/9.8ft

Water Pipe Length: 6m/19.68ft

Blade Diameter: 133mm/5.23in

Max. Cutting Size(W*D): 42*41mm/1.65*1.61in

Applicable Blade Diameter: 133mm/5.23in(Up to 7 Blades)

Auxiliary Handle Length: 17cm/6.69in

Product Size(L*H): 45*14cm/17.72*5.51in

Package Size: 54*21*31.5cm/21.26*8.26*12.4in

Gross Weight: 10.3kg/22.7lbs

Net Weight: 6.2kg/13.6lbs

Package Included

1*Molding Slotting Machine

5* Blades(Four Installed on the Machine)

1*Toolbox

1*Water Pump

1*Water Pipe

1*English Manual

All Accessories for Assembly

Notes

Please note that it is necessary to test this product before use. Please do not use it if the test fails.

Please note that when using a water pump, the machine head should be facing downwards to prevent water from entering the body. Please do not use this product in rainy or other adverse weather conditions. When cleaning the machine head, water should be avoided from entering the machine body through the vent.

Please beware of potential safety hazards in electricity use. Please use this product according to the English manual, take necessary personal protective measures, and keep them out of reach of children.

Please note that this product can be used in conjunction with a vacuum cleaner (not included). When using a vacuum cleaner to slot, when the bottom plate is adjusted to the bottom position, the front protective cover is fully attached to the wall (ground), thereby achieving a better vacuum suction effect. Please note that the water pump and vacuum cleaner cannot be used simultaneously.

Please regularly check the wear of the carbon brush. When there is a large spark, the carbon brush should be replaced promptly. The cutting blade is a consumable material that is easily damaged. If there is any damage, please replace it on time.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
Adjustable Slotting: It can accommodate up to 7 5.23-inch blades, and the cutting depth and width can be adjusted by changing the size and number of blades with a maximum of 1.61" in depth and 1.65" in width. You can adjust the blade according to your needs to cut a more suitable area.
Ergonomic Design: The front auxiliary handle is 180° adjustable and the rear main handle is 90° rotatable, together with optimized weight distribution that gives you better control while cutting, allowing you to find the most comfortable angle for labor-saving operation and meeting different work requirements without scraping your hands when slotting into the corners.
Dust-free Cutting: The water pump with a 19.68ft hose can supply water quickly, improve cutting efficiency, reduce dust splashing during cutting, lower the temperature of the saw blade while extending its service life, and protect the user's health. You can also adjust the water flow through the outflow head.
Convenient Storage&Carrying: The equipped professional toolbox and 13.6 lbs lightweight allow for convenient and effortless storage and carrying.
Safe to Use: The leakage protection device on the power cord, self-locking switch, and blade protective cover can all protect your safety and effectively prevent accidents from happening. You only need to loosen the screws, flip the movable cover outward, and then tighten the screws to adjust the protective cover.
Laser Positioning: The laser function provides guidance for cutting in the correct direction, allowing for straighter lines and more accurate cutting work.
Carbon Brush Replacement: The carbon brush is designed to the side for easier replacement when needed, effectively ensuring the efficiency and service life of the machine.
Complete Accessories: The five saw blades of 5.23" in diameter can be interchangeably adjusted to improve work efficiency. The practical installation tools help you use this machine with less time and effort.

Details

Heat Dissipation Holes: The heat dissipation holes can effectively discharge the heat during operation and extend its service life.
Extended Power Cord: A 9.8ft power cord allows you to expand your work range, eliminating the need for frequent socket changes.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

Unbranded

Power type

Corded Electric

Charger included

Volts

110 V

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.