Yibooy For Raspberry Pi 5 Active Cooler with Adjustable Speed Cooling Fan (Silver)

Specification:
Origin: Mainland China
Accessory Type: Cooling Fan
Compatible With: for Raspberry Pi 5

Product introduction
1. Special radiator for Raspberry Pi 5, the active cooling cooler is an aluminum oxide radiator with an integrated blower.
2. If you want to use for Raspberry Pi without a case to withstand continuous heavy load work without throttling, you can choose to install an active cooling cooler.
3. The blower is also selected for low noise and extended working life. It pushes air to cool the fin-type aluminum heat sink.

feature
Single piece anodized aluminum radiator
Radiator-mounted temperature-controlled fan, secured by three screws
Spring-loaded push pins for mounting for Raspberry Pi 5
Pre-coated thermal pads for heat transfer

Specification
Input voltage: 5V DC powered via the four-pin fan header for Raspberry Pi 5
Fan Speed Control: Pulse Width Modulation Control with Tachometer
Maximum airflow: 1.09 CFM
Maximum fan speed: 8000 RPM +/- 15%
Product material: anodized aluminum
Product size: 63*43*20MM/2.48x1.69x0.79inch

Tailored for Raspberry Pi 5:
The idle temperature for Raspberry Pi 5 CPU is about 65°C without any heatsink installed on the motherboard
Puts a constant load on the CPU when running without cooling, causing maximum temperatures to climb above 85°C

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Included: 1 x Active Cooler for Raspberry Pi 5 (Specifications of your choice)