Alphacool's versatile Apex Heat Gun is the perfect tool for every water cooling enthusiast and has earned a permanent place in the toolbox.Attention: This Heat Gun has an EU plug. An adapter will be required if you do not have an EU outlet.The temperature and airflow can be easily adjusted using buttons on the top of the Heat Gun. When activated, the large LCD display reliably shows the current temperature and the strength of the airflow. Equipped with three rubber feet at the back, the Heat Gun can be placed perfectly to have both hands free while working. The rubber feet give the Heat Gun a very stable stand and facilitate, among other things, the cooling process after work is done. The Heat Gun is equipped with various safety functions that speed up the cooling process. After switching off the heat, the fan continues to run to remove the excess heat in the unit and allow the heating coil to cool down evenly. This process significantly extends the durability of the Heat Gun. The scope of delivery includes 3 nozzles for various applications.Shrinking of heat shrink tubingDeforming articles made of acrylic, PVCWelding of thermoplastic polymers, tarpaulins, and foilsSoldering of tin or loosening of soldered jointsRemoval of oil paints, varnishes, and plastic plasterTechnical dataL x B x H 26.5 x 25 x 9 cmVoltage 230V ACFrequency 50/60 HzMax. power consumption 2000 WCurrent 8ATemperature range 80-650 °CAirflow 15-35.7 m3/hWeight with cord 0.8 kgLength of cord 1.8 mColor Blue Model: 10178