DINITROL D-9000 Automotive Urethane 600ml 2 Foil-Wrap + 538 Plus (2) 10ml Primer Stick
(No ratings yet)
Key item features
- Benefits: - High Modulus - Non-Conductive - Fast Curing - Cold Applied - OEM Approved - Meets Applicaable FMVSS
- Directions: This urethane requires the use of DINITROL 538 PLUS Primer, this is not a primerless urethane. All bonding areas must be clean, dry and free from all contaminates. The glass must be pretreated with either the one-step-primer 538 plus, or with the Activator Plus. If there is no existing urethane on the pinchweld to use as a substrate, apply either 538 Plus or D-530 to the pinchweld bonding area.
- Method of use: The application of the DINITROL 9000 is done by extrusion out of foil wraps and cartridges. Requires power caulking gun or 26:1 thrust ratio to properly dispense. Product has very high viscosity and can not be dispensed without proper equipment. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications.
- Fast Curing times Safe Drive Away Time - 45min- 1hr depending on temperature and humidity - check description for exact cure times.
- (2) 600ml Foil - equivalent to 4 tubes/cartridges and (2) 538 Plus (10ml) Primer Stick. Require sausage style caulking gun to dispense.
Specs
- Manufacturer part numberD-9000
- BrandDINITROL
- ColorBlack
Current price is USD$51.95
Price when purchased online
Out of stock
How do you want your item?
Out of stock
About this item
Product details
Polyurethane adhesive for auto windscreen direct glazing. Direct glazing applied cold adhesive.
The black colored one component applied cold polyurethane adhesive is designed for the direct-glazing of automotive glasses.
The product enables a 45min-1hr safe drive away once applied for customer convenience. DINITROL 9100 provides good adhesion on paints with excellent working characteristics. The fast curing, low conductive, high elasticity, OEM approved, and cold applied adhesive works on all vehicles whilst in ambient temperatures from -18 deg C to 45 deg C. Storage in closed packaging between 0 and 35 C.
*For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.
*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product. The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product. The buyer understands that by purchasing this product to use themselves without the use of a professional as recommend by the seller and manufacturer serious injury or death may result.*
DINITROL 538 Plus is a one-step primer for windscreen bonding. DINITROL 538 Plus is a solvent containing, physically and chemically drying black primer which promotes the adhesion between the glass/paint surface and the direct glazing adhesive and acts as a UV protection.
- One-step glass primer for the ceramic coating
- Pretreatment of RIM and paints
- Long life primer (no reaction within 3 months)
- Inhibits rust in small nicks and scratches
- Compatible with all DINITROL adhesive systems
Application temperature 5 C - 40 C - Application method felt / brush
Drying time > 5 min *
Adhesion with direct glazing Polyurethanes on glass-frit:
- with activator - good
- without activator - good
Shelf life 12 months
Important Note:
Due to its reactivity with moisture, the primer has to be used within 1 week after bottle has been opened (if properly sealed). DINITROL 538 Plus should not be used if the product has remained opened for an extended amount of time. Replace inner seal and cap tightly and immediately after each use to ensure maximum shelf life. This product is suitable for experienced professional users only
The black colored one component applied cold polyurethane adhesive is designed for the direct-glazing of automotive glasses.
The product enables a 45min-1hr safe drive away once applied for customer convenience. DINITROL 9100 provides good adhesion on paints with excellent working characteristics. The fast curing, low conductive, high elasticity, OEM approved, and cold applied adhesive works on all vehicles whilst in ambient temperatures from -18 deg C to 45 deg C. Storage in closed packaging between 0 and 35 C.
*For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.
*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product. The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product. The buyer understands that by purchasing this product to use themselves without the use of a professional as recommend by the seller and manufacturer serious injury or death may result.*
DINITROL 538 Plus is a one-step primer for windscreen bonding. DINITROL 538 Plus is a solvent containing, physically and chemically drying black primer which promotes the adhesion between the glass/paint surface and the direct glazing adhesive and acts as a UV protection.
- One-step glass primer for the ceramic coating
- Pretreatment of RIM and paints
- Long life primer (no reaction within 3 months)
- Inhibits rust in small nicks and scratches
- Compatible with all DINITROL adhesive systems
Application temperature 5 C - 40 C - Application method felt / brush
Drying time > 5 min *
Adhesion with direct glazing Polyurethanes on glass-frit:
- with activator - good
- without activator - good
Shelf life 12 months
Important Note:
Due to its reactivity with moisture, the primer has to be used within 1 week after bottle has been opened (if properly sealed). DINITROL 538 Plus should not be used if the product has remained opened for an extended amount of time. Replace inner seal and cap tightly and immediately after each use to ensure maximum shelf life. This product is suitable for experienced professional users only
- Benefits: - High Modulus - Non-Conductive - Fast Curing - Cold Applied - OEM Approved - Meets Applicaable FMVSS
- Directions: This urethane requires the use of DINITROL 538 PLUS Primer, this is not a primerless urethane. All bonding areas must be clean, dry and free from all contaminates. The glass must be pretreated with either the one-step-primer 538 plus, or with the Activator Plus. If there is no existing urethane on the pinchweld to use as a substrate, apply either 538 Plus or D-530 to the pinchweld bonding area.
- Method of use: The application of the DINITROL 9000 is done by extrusion out of foil wraps and cartridges. Requires power caulking gun or 26:1 thrust ratio to properly dispense. Product has very high viscosity and can not be dispensed without proper equipment. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications.
- Fast Curing times Safe Drive Away Time - 45min- 1hr depending on temperature and humidity - check description for exact cure times.
- (2) 600ml Foil - equivalent to 4 tubes/cartridges and (2) 538 Plus (10ml) Primer Stick. Require sausage style caulking gun to dispense.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it. Â
Specifications
Manufacturer part number
D-9000
Brand
DINITROL
Color
Black
Model
D-9000
Warranty
Warranty information
2 Years
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
