TRQ Front Strut & Coil Spring Assembly Set Driver & Passenger Sides Fits Select 03-07 Honda Accord

These pretty much match exactly. The only difference is they have one addition coil loop in the springs. Same diameter though. I had to file a bit of slop weld off the shock base where it enters the fork to get it in on one strut. Other than that it was built perfectly. The ride on my Accord is great now. It feels glued to the ground.

Parts a great. As the video shows its really smooth. One thing I did differently, I used my jack to push the rotor/lower control arm with a jack to align the screw holes. I thought this job was going to take days, I mean at the mechanic shops they always have posters about shocks and mechanic charge thousands, but this job took less than an hour each side. One more thing, the Wishbone didn't slide in smoothly to bottom on the strut, you have to just pry the Wishbone with a screw driver, it required moderate amount of force, not difficult. And look for FR and FL sticker, these two aren't interchange able (front right and front left)