Jr1930Rxz24V Children'S Electric Car Control Box With Remote Controller

Features:
* Strict quality control standards to build and test.
* Stable performance, high reliability.
* How to determine if the control box is suitable for your car?
* Open the damaged electric passenger car and check the control box.
* If the appearance of the control box is the same, this part should fit your car.
* Frequency matching is required for first use (or battery replacement);
Step 1. Install two AAA 1.5V batteries, (pay attention to the positive and negative polarity in the battery chamber), and finally close the battery cover, the indicator light will flash three times to indicate that the battery is installed correctly.
Step 2. Press and hold the frequency key (car selection) for about 2 seconds, the indicator light will flash
Step 3. Turn car power, indicator light will out
Step 4. If the matching frequency is unsuccessful (the indicator light does not go out), turn off the power and repeat steps 2 and 3.

Specifications:
Part Name: Children's Electric Vehicle Controller
Model: JR1930RXZ-24V
Voltage: 24V
Material: ABS+Metal
Size: Standard
Color: As shown in the picture
Type (optional): Full set, JR1932RX-24V receiver, remote control

Package Contents:
Listing 1: 1 x Receiver
Listing 2: 1 x Remote Control
Listing 3: 1 x Receiver + 1 x Remote Control

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.