8T Pneumatic Punch Machine Desktop Punching Press Machine with Controller

Description:
The pneumatic press is the high-pressure gas produced by the compressor, which is transported to the solenoid valve through the gas pipe. The working state of the cylinder is controlled by the movement of the solenoid valve through the switch, and the punching is completed.

Parameter:
Voltage: 110V
Pressure: 17636lb/8000kg
The die hole diameter: 0.98inch/2.5cm
Working Countertops Size: 18.9*12.6inch/48*32cm
Outer diameter of trachea: 0.47inch/1.2cm
Booster cylinder specification: 3.94inch-0.59inch/100mm-15mm
Working air pressure: 0.5-0.8MPa

Machinable materials:
For sheet, strip, coil to shear, punching, blanking, forming, bending, riveting, etc;Suitable for non-ferrous metal, plastic parts processing.

Note:
1. 46# antiwear hydraulic oil should be added to the hydraulic cylinder. It is recommended to replace the hydraulic oil
after one year of use. (Due to ex-factory debugging, there will be a small amount of hydraulic oil in the machine, please prepare your own hydraulic oil after receiving the goods).
2. Check whether the machine bolts are tightened before working. If they are loose, they must be tightened before working.
Check whether the air pipe is properly connected to prevent air leakage and make the machine unable to work normally.
3. Avoid placing your hand under the punching shaft during work to avoid accidents.
4. Do not wipe the machine with a damp cloth to avoid rusting the machine.
5. When disassembling, installing and adjusting the mold fixture, the machine must be turned off, and standby operation is strictly prohibited to avoid personal injury.
6. The rated pressure of the air compressor is 0.8mpa. The capacity of the air compressor storage tank is about 60L,the larger the capacity, the longer the service time and the more stable it is.
The displacement is optional 200L/min, the larger the displacement, the larger the applicable machine model.
7. The actual output pressure is about 80% of the theoretical pressure.

Item included(230292):
Techtongda 17636Lbs/8000kg Pneumatic Punch Machine