App wireless control.
Built-in fuse, 16 million colors (RGB), 29 modes, DIY any color and mode you like.
6-in1 light strips with 315 inches of fiber optics (cuttable)
360 degree for adjusting.
Little heat, low energy consumption, long service life
Voltage: DC 12V
LED: SMD 5050
Simple design for you a beautiful, exotic and romantic interior.
High brightness light guide.
Installation steps:
Measure the length of the location where you want to install the light, and cut the transparent tube according to this length
Use the equipped prying tool to pry open the slit to be installed and embed the transparent tube into the slit
Pass the optical fiber through the installed transparent tube (the fiber can also be cut as needed)
link the optical fiber to the five strips of light and fixed by the screws on the strip
Place the wires and LED lights in the appropriate location (can be hidden in the center console, dashboard, under the footrest or other places)
Tip: Please test the lights before installation (link the car charger to the car, then turn on the button switch)
APP linking steps:
Scan the QR code on the control box and then download the APP
Turn on your cell phone Bluetooth
Open APP and connect the light (connect in this APP)
Package list:
1 x 6-in-1 LED light bar kit
Tips:
Please test the light before installation. (Turn on the car charger button switch)
It may be difficult to pass all the optical fibers through the transparent tube.
You can cut the transparent tube to a suitable length, and then pass the optical fiber through.
The length of the installed optical fiber exceeds 100inch. If the brightness of the optical fiber end is dark, it is recommended to add 1Pc RGB LED light at the end to make the optical fiber cable meet the brightness requirements.
