NEW 22"x12" Concrete Stamps Mats Set Concrete Texturing Skin For Wall & Floor US

NEW 22"x12" Concrete Stamps Mats Set Concrete Texturing Skin For Wall & Floor US

Professional Grade PU Concrete Stamp – Decorative Concrete Texture Mats for Stamped Pattern Finishes – Perfect for DIY, Concrete Overlay, and Stone Pattern Projects

Description

If you want your floor to look more aesthetically pleasing then this concrete stamping mold would be the ideal purchase, it is made from a sturdy PU that is impact and abrasion resistant for a long life. Its clear stone pattern adds a creative pattern to the concrete surface and adds a non-slip effect. It will provide the ideal solution for your unique indoor or outdoor decorative projects!

Details

Practical Handles: Two sturdy carrying handles on the back allow you to lift and remove the item quickly and easily.

Uneven Surface: It can provide a good anti-slip effect when printed on a concrete floor.

Application

It is widely used in courtyard paths, driveways, swimming pool platforms, sidewalks, parking lots, etc. for imprinting concrete. It is suitable for both walls and floors and creates beautiful textures on driveways, patios, sidewalks, interior floors, and more!

Construction Process of Embossed Floor

» The formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.

» Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.

» Use special magnesium alloy edge finishing plaster to finish edges and corners as required.

» Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3.

» Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.

» After the initial setting of the color strengthening material, when the surface is dry and hasn't obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.33 lbs.

» Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.

» Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.

» After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.

Specifications

Material: PU

Texture Style: Stone Texture

Color: Red

Assembly Required: No

Number of Pieces: 1

Operation Mode: Manual

Gross Weight: 3.2kg/7.05lbs

Product Size: 56.5*30.5cm/22.2*12inch

Package Size: 56.5*30.5*3cm/22.24*12*1inch

Package Included

1* Concrete Stamping Mold