Hero image 0 of ALFI brand ABFS3320S-BM Black Matte Workstation 33" x 20" Single Bowl Step Rim Fireclay Farm Sink with Accessories, 0 of 7

ALFI brand ABFS3320S-BM Black Matte Workstation 33" x 20" Single Bowl Step Rim Fireclay Farm Sink with Accessories

(No ratings yet)

ALFI brand ABFS3320S-BM Black Matte Workstation 33" x 20" Single Bowl Step Rim Fireclay Farm Sink with Accessories Alfi Brand Abfs3320s 33 Farmhouse Single Basin Fireclay Kitchen Sink Black ALFI Brand ABFS3320S W White Smooth Apron Workstation 33 x 20 Single Bowl Step Rim Fireclay Farm Sink with Accessories Alfi Brand Abfs3320s 33 Farmhouse Single Basin Fireclay Kitchen Sink Grey

Actual Color:Black Matte

Key item features

Features a step rim which turns your sink into a workstation with room to hold the included bamboo cutting board and stainless steel drain mat. These accessories can slide left to right giving you more ways to use the sink. Also included is a stainless steel grid to protect the bottom of your sink bowl.
Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot / pan up to 350' F hot.
This sink is constructed of solid high-grade fireclay material using high pressure casting ensuring durability longevity and resilience to acids alkali's scratches and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
The walls taper from top to bottom so the top thickness is 10mm and the bottom is 19mm.
Capable of being installed via Under-Mount (countertop over edge of sink) Top-Mount (countertop lower than top edge of sink) or Flush-Mount (countertop even with sink)
Standard 3 ?? center drain and can be used with a garbage disposal.
These sinks are not adversely affected by scratches from pots pans knifes etc.
Due to the organic nature of the fireclay material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut outs. Furthermore minor imperfections may appear. These are not defects- this is what makes each sink uniquely its own. Defective sinks will not pass our quality control inspection.
Color: Black Matte
It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner side walls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.

Specs

Dimensions
33.00 x 20.00 x 10.00 in
Sink type
Farmhouse Sink
Material
Fireclay
Color
Black Matte
Features
Workstation
Brand
ALFI Brand

Current price is $681.98

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives by Thu, Apr 30

Sold and shipped by Homesquare

4.0787811539774665 stars out of 5, based on 11716 seller reviews(4.1)

Report an issue with this seller

Free 30-day returns

Other sellers

$712.72

+Free shipping

Shipping, arrives by Fri, May 1 to Columbus, 43215

Sold and shipped by Buildcom

Free 30-day returns

About this item

Product details

This 33" single bowl ALFI brand fireclay farm sink is a throwback to a simpler time. Designed to offer the traditional popular look of an apron farm sink with a contemporary twist featuring extra thin walls and a step rim turning the sink into a workstation with space for a cutting board and drain mat. Made of the highest quality solid fireclay to ensure it not only looks great but also lasts for a very long time.

Features a step rim which turns your sink into a workstation with room to hold the included bamboo cutting board and stainless steel drain mat. These accessories can slide left to right giving you more ways to use the sink. Also included is a stainless steel grid to protect the bottom of your sink bowl.
Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot / pan up to 350' F hot.
This sink is constructed of solid high-grade fireclay material using high pressure casting ensuring durability longevity and resilience to acids alkali's scratches and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
The walls taper from top to bottom so the top thickness is 10mm and the bottom is 19mm.
Capable of being installed via Under-Mount (countertop over edge of sink) Top-Mount (countertop lower than top edge of sink) or Flush-Mount (countertop even with sink)
Standard 3 ?? center drain and can be used with a garbage disposal.
These sinks are not adversely affected by scratches from pots pans knifes etc.
Due to the organic nature of the fireclay material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut outs. Furthermore minor imperfections may appear. These are not defects- this is what makes each sink uniquely its own. Defective sinks will not pass our quality control inspection.
Color: Black Matte
It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner side walls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Dimensions

33.00 x 20.00 x 10.00 in

Sink type

Farmhouse Sink

Material

Fireclay

Color

Black Matte

Warranty

Warranty information

We are happy to accept returns of unused or defective items for a refund within 30 days from the date of delivery. For returns outside 30 days, please use the 'Contact seller' feature on our Marketplace seller's information page our Customer Service team to go over our options. For full details, please view the Shipping and Payments tab above. To initiate a return simply go to the Walmart Orders Portal and submit a return request. We ask that all items be returned with all original components via a traceable method. Once your return is received and processed, we will quickly get your refund or replacement issued.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.