WECIYGG Mini Swimming Pool Heat Pump 12000 BTU for Above Ground Pools, 3.5 kW Electric Pool Heater with Titanium Heat Exchanger, 110V 60Hz, Up to 2000 Gallons

• Ideal Choice for Above Ground Pools: Weciygg mini pool heat pump is specially designed for small pools of up to 2000 gallons. It is suitable for above-ground swimming pools, hot tubs or spas
• Energy Saving: The heat pump has an energy efficiency of 4.5, using the surrounding air to heat the pool, which is more economical than propane, natural gas, and electric heaters for maintaining the ideal water temperature
• Premium Specs: Equipped with a powerful compressor, the pool heat pump has a capacity of 12000BTU/hr. The pure titanium heat exchanger can resist any corrosion from pool water. An intelligent control system maintains the pool temperature at a consistent level
• Premium Security: Available with the child lock and an advanced protection system which has auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection
• Recommendations: Place the heat pump upright for working better. If you want your pool's temperature to rise quickly, having a solar cover covering the pool at night is helpful

• WECIYGG Mini Swimming Pool Heat Pump is specifically designed for mini swimming pools, not an electric, solar or gas heater. The operation only requires very limited electric input, hence its high efficiency and the heat conversion rate can reach a score of COP 4.5
• The solar pool heater is too dependent on weather conditions and the amount of sunlight, hence limiting its usage. Without enough sunlight, the solar heater cannot run efficiently. In contrast,WECIYGG Mini Pool Heat Pumpis not affected by weather conditions and can be turned on anytime (as long as outdoor temp. is above 40F), so that your pool's temperature can be adjusted whenever you want
• Reliability, efficiency and a quiet backyard
• Air 80°F, Humidity 80%, Water Heated to 80°F
• Heating Capacity: 3.5 kW
• Power consumption: 0.65 kW
• C.O.P. 4.5 W/W
• Air 59°F, Humidity 70%, Water Heated to 80°F
• Heating capacity：2.5kW
• Power consumption: 0.64 kW
• C.O.P: 3.9 W/WRated Heating Capacity: 12000 BTU/hr
• Voltage: 110V/1PH/60Hz
• Advised water flow: 300 -750 Gal/h
• Water Pressure Drop: 15KPa
• Rated/Max Current: 6.4/7.5 Amp
• Air Temperature Requirement: 53°F~107.6°F

Notice:

• Keep the pump upright for more than 24 hoursbefore using it to wait to the contents to settle, because it is maybe upside down or on the side during shipping
• Each pump istested with water and electricityat manufacturing before the sale, so there will be little water, which doesn't represent it is used
• You need to confirm yourwater pump, and the advised water flow of our mini heat pump is300 -750 gal/h
• If the water flow is too fast, there is not enough time for the pump to heat water, causing the outer part to freeze up
• If the water flow is not enough, water is not circulating up, which also results in E8 Code and it doesn't work
• When the pump works properly, there isa temperature differencebetween the fan outlet and the back air inlet, and also a temperature difference between the water inlet and the outlet
• If you want your pool's temperature to rise quickly, havinga solar covercovering the pool at night is helpful
• It is helpful to take somephotos or videoswhen you have any usage issues