Next Day Labels, Superior Carbon-Less NCR, Pre Collated Paper, 500 Sheets Per Pack 8-1/2" x 11" 3 Part Straight, 5909

Difference Between Straight and Reverse Paper

Mark Three Plain Test sheets:

Mark the First sheet A

Mark the Second sheet with a B

Mark the Third sheet with a C


Load the three test sheets in the copier

Place the original you wish to copy face down in the copier and position it appropriately.

Load the three sheets marked as A, B & C face up A on top and B beneath it in the feeder tray.


Produce the test copies

Set the Copy Qty to 3 and press the start button.

Remove the test copies from the output tray without disturbing the delivered sequence.


Check Sequence and Print Side

If the sheet marked A is on the top, your copier requires Straight Sequence.

If the sheet marked C is on the top, your copier requires Reverse Sequence


If the original image copied onto the side marked with the A, the papers print side must be loaded FACE UP in the feeder tray.

If the original image has been copied onto the reversed side, the papers print side must be loaded FACE DOWN in the feeder tray.

The Papers Print Side is identified by a side ream identification arrow located on the end of the ream.

The Papers Print Side is also clearly indicated on the ream label.