Sewell Light-Link Fiber Optic 8K HDMI Cable

The Light-Link is an "HDMI over Fiber" cable that sends the video information through optical fiber. Because it uses fiber, it can send the signal instantly with no perceptible latency at longer distances than regular copper HDMI cables. It also can send much higher resolutions up to 8K at these distances due to the high data throughput of fiber.

Since the optical converters are housed inside the heads of the cable, there is no need for any external repeaters. This also means that there is no need for extra power adapters or patch cables.

The Light-Link eliminates possible points of failure. In a typical HDMI extender setup with baluns you have a total of eight connections:

• x4 HDMI connections - video source to sender balun and receiver balun to display.
• x2 RJ45 connections - transmitter balun to receiver balun.
• x2 power connections - from baluns to power outlets.

That's eight possible things that can get unplugged, plugged in the wrong way, or become defective. With the Light-Link you only have one cable that can be easily verified end to end. Troubleshooting is incredibly easy compared to any other setup.

• 48 Gbps
• 8K @ 60Hz
• 4K @120Hz
• HDMI 2.1
• HDCP 1.4/2.0/2.2
• Compatible with ARC and CEC
  
• Operating Temperature  -20℃ to 80℃ ± 5℃
• Recommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.