Features:
*Thyristor is mainly used for resistive loads(electric heating wire incandescent lamps, etc.), and most single-phase AC motors can also be used, but they are not guaranteed.
*The regulator with enclosure is safer, more convenient to install, more suitable for families and factories that are not convenient to install.
*Use 41A thyristor.
*The use of 1.6 thick FR-4 high temperature resistant circuit board, reasonable circuit design, and the use of increased and thickened welding design, even large current is enough to cope with, the use of safer and more reliable.
*The circuit has undergone many technical improvements, each accessory, and now has complete technical maturity.
*Dual capacitance design(safety capacitor+ metal film capacitor) effectively absorbs surge and voltage spikes, more effective protection of thyristor, higher efficiency and safer.
*The power should be reduced for a long time, and it is recommended to use within 3000W of room temperature resistive load.
Specifications:
Product name: 6000W AC regulator
SCR model: BTA41600B
Size: 130*60*47mm
Knob hole: 6mm(excluding protruding knob)
Maximum power: 6000W(resistive load limit power)
Efficiency: more than 90%
Working voltage: AC 220V
Regulating voltage: AC 0-220V, resistive load conditions, starting ten volts, the callback can be 0
Package Content:
1 x 6000W Volt Regulator
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
