Vehicle Specific Fit: for Car Truck RV Car Boat Motorcycle and most vehicles. Product Information: Extend length: 500mm/20inch, Compressed length: 300mm/11.8inch, Force:135Ib/600N/60kg, Color: Red. Product Highlights: Easy to install with simple hand tools in just few minutes., The gas springs are powerful, can support small,medium to heavy object. Such as car window, car bonnet or car tailgate., With easy fittings to any surface, just attach and lift, your gas spring lifts and hold the weight objects., This gas spring is universal, which fits for RV window, car hood and trunk, pickup truck tonneau cover, tailer cover, bus luggage door, motorcycle seat cover and so on., Anti-rust and Corrosion Resistance, Widely used in rainy and snowy weather, or wet condition. Made of: Metal. How to use: STEP 1: Please use safety stands under the vehicle or supports when you install gas struts. It is more easier and convenient if someone could help you open the hood or tailgate. STEP 2: Before removing the old gas struts, check the end connection and compare the extended length of your car Old one to make sure they are same. STEP 3: Put a small flat headed screw driver on the end of U shaped band of gas struts and remove it. Turn the screw driver slowly and it will lift up on the band approx. 1/8'', then pull the struts away from car. STEP 4: To install the new struts, please follow the same way in reverse. If the U band is not lifted up before installing the new support, it may be damaged. STEP 5: If the ends are not aligned, you may need to rotate the struts. First connect the shaft end of the bracket to the vehicle, and then rotate the entire body of the bracket clockwise to align the ends. Content: 2 Pcs Lift Supports Strut Tip: If the temperature is lower than minus 20 degrees, the oil density of the gas spring turns high (frozen) and it is difficult to press down.
WARNING: 