JVCC 761 Industrial Grade Filament Strapping Tape: 3 in x 60 yds. (Natural)

JVCC 761 Industrial Grade Filament Strapping Tape is a fiberglass filament reinforced polypropylene film tape used for packaging, bundling and palletizing. This tape is also referred to as "filament tape" or "string tape".

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: fiberglass filament reinforced polypropylene film
- Adhesive: synthetic rubber
- Thickness: 5.5 mils (carrier, adhesive)
- Adhesion: 91 ounces per inch (to stainless steel test panel)
- Tensile Strength: 200 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 140F
- Elongation: 7 %