generator,Low Output 1hz-500khz Dds Function Output 1hz-500khz Function Low Amplitude Dc4~10v 1hz-500khz Amplitude Dc4~10v Function Shieny

DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth/ECG/Noise Output 1Hz-500kHz Frequency Amplitude DC4~10V Voltage

Offset: maximum ±10V

Specifications:


Resolution: 1Hz

Package List:


This Low Frequency Signal Generator is a professional product to generate sine/triangle//forward and reverse sawtooth .

Current: 160mA when voltage is 5V.

Note:

Can section into value: 1, 10, 100, 1000, 10000Hz.

LCD display to indicate data accurately.

1 * USB Cable

Sine Distortion: <1% below 1kHz, <0.5% above 1kHz

High-speed frequency (HS) output to 16MHz, Can choose 1MHZ, 2MHZ, 4MHZ, 8MHZ, 16MHZ.

DDS signal amplitude of offset amount can be adjusted separately by two potentiometers.

All setting parameters can be saved, will restore last used configuration automatically.

Item Size: Approx. 12 * 8.5 * 3.2cm / 4.72 * 3.35 * 1.26in

DDS Frequency : sine 1Hz-500kHz ( output amplitude will decrease with further increase of frequency), other waveforms 1Hz-100kHz (but upper limit of adjustable frequency is not limited, if distortion and shaking requirements are not high, use frequency can be further increased).

1 * Crocodile Clip Test Line

Comes with an USB cable for supply.

instrument will be damaged if voltage is higher than 10V.

1 * User Manual(English)

Package Weight: 272g / 9.59oz

Output Amplitude: maximum ±10V (P-P)

Item Weight: 147g / 5.19oz

DDS Frequency : 1Hz-500kHz

Output Impedance: 50ohms

Material: FR4 + Acrylic

Package Size: Approx. 16 * 11 * 5cm / 6.30 * 4.33 * 1.97in

Output Waveform: can output sine , , triangle , forward sawtooth , reverse sawtooth , electrocardiogram , noise . High-speed .

Operating Voltage: DC4~10V

1 * Signal Generator