Hero image 0 of fankhu RGB 10Gbps M2 NVME PCIe to USB3.1 Gen2 Type-C External SSD Case with Cooling Fan, 0 of 9

fankhu RGB 10Gbps M2 NVME PCIe to USB3.1 Gen2 Type-C External SSD Case with Cooling Fan

Name: fankhu RGB 10Gbps M2 NVME PCIe to USB3.1 Gen2 Type-C External SSD Case with Cooling Fan
Brand: fankhu
SKU: 12599518135
Availability: OutOfStock

(No ratings yet)

fankhu RGB 10Gbps M2 NVME PCIe to USB3.1 Gen2 Type-C External SSD Case with Cooling Fan fankhu RGB 10Gbps M2 NVME PCIe to USB3 1 Gen2 Type C External SSD Case with Cooling Fan

Size:size-Out of stock

Actual Color:color-Out of stock

selected, color, Out of stock

Key item features

1. 10Gbps high-speed transmission: Built-in JMS583 master chip, 1GB large files per second, 10Gbps transmission rate, and the measured read/write speed can reach 992MB/S
2. Write protection function: After the write protection function key is turned on, the data in the hard disk cannot be modified or deleted, and viruses cannot enter. Put the security lock on the data and open the security lock, which can effectively prevent the entry of viruses, and also prevent accidental deletion/formatting, etc., and prevent the invasion of diseases, illegal tampering, and accidental deletion of data
3. Intelligent temperature control&cooling fan: The built-in silent fan has a rotating speed of 8000 RPM, which is highly efficient in heat dissipation. Large area air intake allows air flow to be unblocked, and the fan heats up rapidly to cool down. The air can be fully coated and circulated with the development of hot air. The strong air outlet can quickly facilitate cooling, so as to achieve more effective temperature reduction for the hard disk. When the temperature exceeds 30 degrees Celsius, it will be activated intelligently. Multiple heat dissipation. High density aluminum alloy shell+cooling fins increase the contact area between the cooling fins and the air, effectively improve the heat dissipation effect, and quickly take away heat. Equipped with silicone heat conduction pad for better cooling during high-speed transmission
4. RGB light effect: Colorful gradual change cycle light, rich and colorful, gorgeous and eye-catching. Yellow, orange, red, green, blue, purple... equipped with two data lines. Type-C to Type-A data cable (10Gbps) is connected to USB computer to facilitate reading large files; Type-C to Type-C data cable connects Type-C mobile phone and notebook, and large games can be played happily

Specs

Brand
fankhu
Internal/external
External
Interface type
USB
Hard drive form factor
M.2
Read speed
992MB/S
Write speed
992MB/S

Price when purchased online

Not Available

How do you want your item?

Not available

Report an issue with this seller

About this item

Product details

Specification:

Origin: Mainland China

Model Number: SSD Enclosure Heatsink

Package: Yes

External Interface: USB

Product model: C2605

Product material: Aluminum alloy + ABS

Product color: Black

Built in interface: M.2 M-Key

Output interface: USB3.1 Gen2 Type-C

Main control scheme: JMS583 (10Gbps)

Support hard disk: M.2 NVMe SSD

Transmission rate: USB3.1 GEN2 10Gbps

Support system: For Windows/Linux/MAC

Data line length: 24cm/9.45in

Applicable size: 2.5 inches

Product size: 101x14x14mm/3.98x0.55x0.55in

Product weight: 280g

Installation steps:

Step 1: Unscrew the two screws on the side of the hard disk case and pull out the PCB

Step 2: Align the card slot and place the hard disk

Step 3: Lock the screws on the back to secure the hard disk

Step 4: Paste the hard disk with thermal conductive silicon film and heat dissipation metal sheet

Step 5: Push the PCB back into the aluminum housing and lock the screws

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

Included:

1 X Hard Disk Case

1 X Type-C to Type-A Cable

1 X Type-C to Type-C Cable

1 X Hard Disk Mounting Screw Pack

1 X Card Taking Pin

1 X Thermal Silicone Sheet

1 X Screwdriver

1 X Heat Sink

1 X Storage Bag

1. 10Gbps high-speed transmission: Built-in JMS583 master chip, 1GB large files per second, 10Gbps transmission rate, and the measured read/write speed can reach 992MB/S
2. Write protection function: After the write protection function key is turned on, the data in the hard disk cannot be modified or deleted, and viruses cannot enter. Put the security lock on the data and open the security lock, which can effectively prevent the entry of viruses, and also prevent accidental deletion/formatting, etc., and prevent the invasion of diseases, illegal tampering, and accidental deletion of data
3. Intelligent temperature control&cooling fan: The built-in silent fan has a rotating speed of 8000 RPM, which is highly efficient in heat dissipation. Large area air intake allows air flow to be unblocked, and the fan heats up rapidly to cool down. The air can be fully coated and circulated with the development of hot air. The strong air outlet can quickly facilitate cooling, so as to achieve more effective temperature reduction for the hard disk. When the temperature exceeds 30 degrees Celsius, it will be activated intelligently. Multiple heat dissipation. High density aluminum alloy shell+cooling fins increase the contact area between the cooling fins and the air, effectively improve the heat dissipation effect, and quickly take away heat. Equipped with silicone heat conduction pad for better cooling during high-speed transmission
4. RGB light effect: Colorful gradual change cycle light, rich and colorful, gorgeous and eye-catching. Yellow, orange, red, green, blue, purple... equipped with two data lines. Type-C to Type-A data cable (10Gbps) is connected to USB computer to facilitate reading large files; Type-C to Type-C data cable connects Type-C mobile phone and notebook, and large games can be played happily

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.