45-9.5 Portable Electric Hinge Drill with Self Stop Cabinets Wardrobes Door Processing

Introduction:
This machine is mainly used for drilling processing of cabinets, wardrobes, door processing and manufacturing, and can adjust the drilling position vertically and horizontally, which is convenient and fast, and the switch control is accurate and in place. One - time completion of hinge hinge hole and screw holes on both sides of the hole, greatly improve the work efficiency.

Parameter:
1. Voltage: 110V
2. Power: 1100W
3. Punching Depth: 0-40mm
4. Speed: 2840r/min
5. Drill: φ35mm*1,φ8mm*2
6. Combined Drill Model: 45-9.5
7. Scale: 19.6″(50cm)

NOTE：Confirm drill hole size before purchase.

Precautions For Use：
1. Before operation, check whether the power cable is properly connected, whether the protective device and the pressing device are complete, and whether the components are normal.
2. The operating position should be bright and without shadow.
3. The drill should be centered, balanced and sharp.
4. This machine is mainly used for wood punching processing (thin aluminum can also be), and the selection of materials can not have nails, screws and other tools damaged or blunt foreign bodies.
5. Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation. The power supply must be cut off before adjusting or removing the wood chips, and can only be carried out after the machine tool stops working.
6. Stop the machine immediately if anything abnormal is found.

Items Included: 027353-SunY
Portable Electric Hinge Drill With Self Stop