5x Car Body Paintless Dent Repair Tool Zinc Alloy Glue Puller Tabs Cold Glue Pad

Product name: Dent Repair Tool
Product material:repair Zinc alloy Glue Puller Tabs Cold glue

Introduce:
Advantages: used directly and independently, without glue sticks

The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent.
Big dent needs slide hammer or puller.（Without include）
Small dent needs mini dent lifter or pulling bridge.
Use different size glue tabs to different dent.
Use cold glue on the glue tabs and stick on the core of dent.
Wait for 5 minutes ( it depends ) and pull it by hand make sure the tabs are strong stick on surface.
Use a slide hammer or dent lifter or any pulling tools lift the dent, try many times.
Drop glue remover or straight alcohol on the glues between tabs and car, remove the tabs and glue.
Check the surface if there still has a dent, use a suitable tabs and repeat the above process.(it could use a line board to check, but experienced users could use it very well)
When there is a bulge (over lift caused), use a tap down tool. Please tap lightly, or it will damage the car.

Package Include:
3 x Cold glue Pads
1 x Puller
1 x 5CM gasket