Easy-Setup Wireless Receiver and Remote Kit Learning Code Technology, Simplifies Control for Lights, Motors

Features:
1.Big Holes, Easy To Connect With Wires
2.Wide Voltage, For Lights / Motors / Garage / Fan / Diy
3.300m Remote Range, 433mhz Stable Signal

Specifications:
Working Voltage: AC90~250V
Rf Frequency: 433mhz
Working Temperature: -30℃ - +70℃
Receiving Sensitivity: -117dbm
Support Encoding: Leaning Code
Receiving Range: Open Space Is 300 Meters
Batteries: ‎1* 12V 27A Battery(Battery Included)
Remote Operating Mode: Momentary Mode / Toggle Mode / Latched Mode
Load Power: 500W

Working Modes:
You Can Set Up In 3 Modes: Momentary Mode,Toggle Mode And Latched Mode.
Momentary Mode:
Press And Hold A Button, 1st Relay Will Work; Release A Button,1st Relay Will Stop.
Press And Hold B Button, 2nd Relay Will Work; Release B Button, 2nd Relay Will Stop.
Toggle Mode:
Press A Button, 1st Relay Will Work; Press A Button Again, 1st Relay Will Stop.
Press B Button, 2nd Relay Will Work; Press B Button Again, 2nd Relay Will Stop.
Latched Mode:
Press A Button, 1st Relay Will Work; Press B Button, 1st Relay Will Stop, 2nd Relay Will Work. Press A Button Again, 2nd Relay Will Stop, 1st Relay Will Work

Set Up:
Momentary Mode:
Press Learning Button Once, Press A Button Once, Succeed.
Toggle Mode:
Press Learning Button Twice, Press A Button Once, Succeed.
Latched Mode:
Press Learning Button 3times, Press A Button Once, Succeed.
Clean Data:
Press Learning Button 8times, The Data Will Be Cleaned. All Remotes Cannot Control This Receiver.

Package Included:
1 X Receiver
1 X Remote Control