EQCOTWEA V-cut Cutting Machine Groove Cutter PCB Board Separator Cutting Thickness Range 0.02-0.06inch with Fixed Blade and Limit Module
Key item features
- Simple constructer, light weight, more easy and convenient to move and ship.
- This V-cut PCB Cutting Machine is made of high-speed steel, which is durable. The upper and lower knives cut to reduce stress and can prevent the solder joint to crack effectively.
- High efficiency, Vmax=200mm/s, and the speed is adjustable. Bottom blade adjustable function: The bottom blade base can adjustable, it is convenient to operate the point to point.
- The top and the bottom guide plate can be adjusted manually to solve the problem of the different height caused by the V-CUT groove. According to the thickness of the circuit board, adjust the height of the upper blade by adjusting the knob.
- The PCB Cutting Machine is used for cutting PCB board in PCB production line,suitable for all kinds of PCB&LED. Suitable for the engraving of the plates with V-cut groove.
Specs
- BrandEQCOTWEA
- Cutting edge materialHigh-speed steel (HSS)
- Abrasive typeSteel
- FeaturesAdjustable, Storage
More seller options (1)
About this item
Product details
Attention:
1. Before using the machine, please read this manual carefully, and it will help you operate it smoothly.
2. Do not remove the guard around the blade under any circumstance, in order not to cause any danger.
3. The machine is only designed for circuit board with pre-scored V-cut, do not use in other purposes.
4. When operating this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.
Adjustment of Machine:
1. Ensure the components on the circuit board will not collide with the body and blade.
2. According to the thickness of the circuit board, adjust the height of the upper blade by adjusting the knob.
Specification
1. Voltage: AC110V/60Hz
2. Power: 40 W
3. Thickness of Cutting Range: 0.6mm~1.6mm
4. Cutting Speed: 0-200mm/s
5. Height of Upper PCB: Less-than-equal 20mm
6. Height of Lower PCB: Less-than-equal 10mm
7. Inner Side of PCB Range: Less-than-equal 240mm
8. Upper Blade Adjust Range: 0-15mm
9. Operating Temperature: 10-35 centigrade
10. Storage Temperature: -20-50 centigrade
11. Length of Limit Module: 405mm
12. Machine Size(L x W x H): 18.9*18.5*21.7 in
Operation Instruction:
1. Connect to the power supply and start the switch.
2. Adjust the gap between the upper and lower blades.
3. The upper and lower cutters must be in the same plane, and the error cannot exceed 0.1mm.
4. Set the cutting travel and speed.
5. Step on the pedal switch, and try sometimes. In case of no abnormity, formal work can be started.
Basic maintenance:
1. After the completion of the work, please turn off the power supply and remove scraps.
2. Pay attention to the protection of upper and lower cutters.
3. When the machine is out of work for a long time, please remove the upper and lower cutters and coat with oil to protect. Please wipe it before use.
4. Pay attention to checking the fastening of all screws.
Item Included: 022502
EQCOTWEA V-cut Cutting Machine Groove Cutter PCB Board Separator Cutting Thickness Range 0.02-0.06inch with Fixed Blade and Limit Module
- Simple constructer, light weight, more easy and convenient to move and ship.
- This V-cut PCB Cutting Machine is made of high-speed steel, which is durable. The upper and lower knives cut to reduce stress and can prevent the solder joint to crack effectively.
- High efficiency, Vmax=200mm/s, and the speed is adjustable. Bottom blade adjustable function: The bottom blade base can adjustable, it is convenient to operate the point to point.
- The top and the bottom guide plate can be adjusted manually to solve the problem of the different height caused by the V-CUT groove. According to the thickness of the circuit board, adjust the height of the upper blade by adjusting the knob.
- The PCB Cutting Machine is used for cutting PCB board in PCB production line,suitable for all kinds of PCB&LED. Suitable for the engraving of the plates with V-cut groove.
