RockJock Adjustable Front Bump Stops for JL Wranglers and JT Gladiators, as well as JK Wranglers are a completely different take on the concept of bump stops! So unique in fact that they were awarded SEMAs 2023 Best New Off-Road/4-Wheel Drive Product of the year! In high articulation situations, axle housing mounted bump stops end up rotating inward toward the center of the vehicle, often missing the upper bump stop entirely, see diagram in the photo gallery). By lowering the bump stop, and being able to adjust it's length, you are able to guarantee bump stop contact with the bump stop pad on the axle when and where you need it. Our adjustable kit features billet aluminum components and 5/16 in. thick steel shims that are able to be added and subtracted for fine tuning - while the bump stop assemblies are on the vehicle. You simply put a socket on the upper bolt to hold it in place, loosen the bump stop body with the supplied spanner wrench, add or subtract bump stop shims as needed and then tighten the assembly back up! The vehicles factory yellow jounce bumpers are retained and relocated by reinserting them back into the bottom of the new aluminum RockJock bump stop bodies. This provides factory feel when the bump stops make contact. Finish is clear anodize on the aluminum and zinc plating on the spacers and bolts.
WARNING: 