Patco 502A Clear Polyethylene Film Tape: 3/4 in x 36 yds. (Clear)

Patco 502A Clear Polyethylene Film Tape combines the conformability, abrasion, and chemical resistance of polyethylene film with an aggressive adhesive system. It is designed as a general-purpose sealing, splicing, and seaming tape. Use as a protective film, a temporary hold down solution, material processing, and industrial fabricating applications. Patco 502A performs well in a variety of indoor and outdoor environments and is designed for long-term applications. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 18mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter plastic
- Backing/Carrier: low-density polyethylene (LDPE) film
- Adhesive: acrylic
- Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier)
- Adhesion: 50 ounces per inch (to stainless steel test panel)
- Tensile Strength: 11 pounds per inch (longitudinal)
- Application Temperature: 50F to 120F
- Service/Operating Temperature: -40F to 190F
- Elongation: 400 %