Redding Type S Elite 308 Winchester Bushing Full Length Sizing, Bushing Neck Sizing, Bullet Seating 3 Die Set

The Redding Type S Elite Bushing 3-Die Neck Sizer Set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0. 001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self-centre on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds. Consumers wanted the ability to both full-length and neck size in the same set. Previously this was not available as the Type S Match Bushing neck die set included a Body Die which would set the shoulder position and size the diameter of the case but it required a second and separate operation. The Type S Elite Set provides the user with the option of using the bushing to size the neck and still full-length size in one operation when it is deemed necessary. This becomes even better when combined with Redding’ s Competition Shell holder set to precisely set shoulder position to a desired and chamber matching length. The final die in the set is the Redding Competition seating die with its micrometre depth adjustment and unique sliding sleeve coupled with a free-floating seat stem. All of which provides a very high degree of concentricity enhancing control of the case and bullet during the seating process.