Miumaeov 35.88CC 4 Stroke Gas String Weed Trimmer Garden Mower Weed Eater Weed Wacker Grass Cutter
Miumaeov 35.88CC 4 Stroke Gas String Weed Trimmer Garden Mower Weed Eater Weed Wacker Grass Cutter
Hero image 0 of Miumaeov 35.88CC 4 Stroke Gas String Weed Trimmer Garden Mower Weed Eater Weed Wacker Grass Cutter, 0 of 16

Miumaeov 35.88CC 4 Stroke Gas String Weed Trimmer Garden Mower Weed Eater Weed Wacker Grass Cutter

|1 rating

Key item features

  • Sturdy and Durable: This product is mainly made of PP, aluminum alloy, manganese steel, and nylon, with high hardness, high abrasion resistance, anti-corrosion, anti-rust performance, and long service life.
     
    High Power: The high-quality engine with 35.88CC displacement and power up to 0.75kw provides the product with super high speed (8500r/min ), thus effectively improving your working efficiency.
     
    Two Blade Heads: The 2T cutting edge blade head with a roller is suitable for paddy pool ridge, crop field, etc. The multi-purpose mowing head is suitable for orchards, vineyards, etc., which can avoid accidentally injuring or cutting saplings when mowing.
     
    High Comfort:  The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. The adjustable position of the handle allows you to control its direction freely and conveniently, thus making mowing easier and more precise.
  • Notes
    The oil mixture ratio should not be wrong or deviated. Please do not use poor-quality motor oil as the matching motor oil.
    Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use.    
    Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.
    The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.
    Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.
    The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.
    The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.
    Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.
    If you do not use the machine for more than 10 days, please pour out the oil in the gasoline and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration.
    If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.
    When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.
    Work Check:
    Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.
    Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge.
    Please check whether the throttle cable is stable in the carburetor position before work.
    Please check whether the blade is in good condition before work, and do not use a damaged blade.
    Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.
    Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.
    Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
    Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Current price is $149.99
Price when purchased online
  • Free shipping
  • Free 30-day returns
Walmart Protection Plan by Allstate

How do you want your item?

How do you want your item?
Ships to
Arrives between May 30 - Jun 2
|
Sold and shipped by DL&WL
3.745967741935484 stars out of 5, based on 248 seller reviews(3.7)
Report an issue with this seller
Free 30-day returns

About this item

Product details

Specifications

Warranty

Customer ratings & reviews

1 out of 5 stars
stars1 rating1 review
How item rating is calculated
Filtered and sorted results would be available on the new 'Customer ratings & reviews' page.
Sort by |

Showing 1-1 of 1 review

Mar 31, 2026
rick
Sold and shipped byDL&WL
1 out of 5 stars review

Verified Purchase

4 stroke or 2 stroke? Confusing information

advertised as a 4 stroke engine but the owners manual states to mix oil and gas 25:1. It has an oil dipstick in the engine and says add 10w30 detergent oil but I don't know why it says mix 2 stroke oil with the gas if it is a 4 stroke? can anyone explain?

Helpful?6KRPAH8V2MW010493104761