Lot of (2) Crunch CS4CX 200 Watts 4" Inches 2-Way CS Series Coaxial Car Audio Speakers NEW!

Lot of (2) Crunch CS4CX 200 Watts 4" Inches 2-Way CS Series Coaxial Car Audio Speakers NEW!

TWEETER DOME MATERIAL: Neo-Mylar Soft Dome Tweeter Impact Resistant Tweeter Elements

SURROUND: UV Resistant Rubber Surround Moisture Resistant Rubber Surround with high Mid-Bass Impact

CONE: Silver Alpha-Cellulose Poly Cones Produces musical midrange and bass tones while remaining light weight

SURROUND / CONE COUPLING: High Temperature Adhesive The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather

GASKET: Textured ABS Assures a ridged linear seal to the mounting surface

TINSEL LEADS: Braided Highly conductive while remain flexible during high power applications

VOICE COIL: Pure Copper Creates strong magnetic field with a very thin extrusion

VOICE COIL FORMER: Kapton Lightweight and efficiently dissipates heat

SPIDER: Epoxy infused Natural Fiber Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process

COOLING SYSTEM: Over-Coil Air is exchanged over the voice coil through the spider

CROSSOVER TYPE: Passive Butterworth Smooth transition of frequencies from midrange/midbass to the tweeter element

CROSSOVER SPECIAL: 6dB Internal Integrated into the design to assure smooth midrange to tweeter frequency transitions

FRAME: Anti-Resonant Stamped Steel Basket Very strong with minimal harmonics or distortions from flex or ringing

MOTOR: Ferrite Magnet Creates a strong magnetic field while remaining small enough to fit nearly every application

CONNECTORS: Use spade connectors or solder direct for the best connection

GRILLS: No. These speakers are typically installed behind an OEM panel

TWEETER MATERIAL: Neo-Mylar Soft Dome Great sound quality and increased reliability

TWEETER SIZE: 1 inch Clear highs while handling plenty of power without sounding harsh

TWEETER SURROUND MATERIAL: Kapton Lightweight and efficiently dissipates heat

RMS POWER HANDLING(CEA426B): 100 watts

PEAK POWER HANDLING (CEA426B): 200 watts

SPEAKER IMPEDANCE: 4 Ω

FREQUENCY RESPONSE +/- 10DB

FREQUENCY RESPONSE +/- 3DB: 55 Hz - 19 kHz

SENSITIVITY (1 WATT/1 METER): 88dB

CROSSOVER POINT: 6K Hz

CROSSOVER SLOPE: 12dB

MOUNTING DIAMETER/CUT OUT: 3.69

OUTSIDE DIAMETER: 5.39

MOUNTING DEPTH/CHASSIS DEPTH: 3

PRODUCT DIMENSIONS

12.06 x 6.19 x 3.13 in

30.6 x 15.7 x 7.95 cm

PRODUCT WEIGHT: 2.2 lbs (1 kg)