Choosing the right size depends on your wall and how you’ll use it. A crushed diamond mirror draws the eye, so sizing thoughtfully helps the room feel balanced.

• Above furniture: Aim for a mirror that’s roughly two-thirds the width of the console, dresser, or fireplace mantel beneath it, with 4–6 inches of clearance on each side.
• Entryway or living room: Medium to large rectangles and rounds add sparkle without overpowering. Tape a paper template to test scale before hanging.
• Full-length: For head-to-toe viewing, taller mirrors can work well when you stand a few feet back.
• Bathroom vanity: Many shoppers choose a mirror width around 70–80% of the vanity.

Checking dimensions and product weight on the item page can help ensure a good fit for your space.

Gentle cleaning keeps the glass clear and the crushed crystal accents sparkling.

1. Dust first: Use a soft microfiber cloth or a clean makeup brush to lift dust from the frame’s textured areas.
2. Clean the glass: Lightly spray glass cleaner onto a cloth (not directly on the mirror) and wipe in circular motions. Avoid ammonia or abrasive powders that can dull finishes.
3. Detail the edges: Use a slightly damp cloth to touch up the beveled edge, then dry immediately to prevent moisture from seeping into seams.
4. Avoid over-wetting: Crushed crystal frames shouldn’t be soaked; a dry buff at the end restores shine.

These steps can help preserve the look, but results may vary based on products used and household conditions.

For safety and aesthetics, repairing mirror glass is challenging and results can vary.

• Stabilize temporarily: If you must keep it in place, apply clear packing tape over the crack on the front and back to reduce spreading. Keep the mirror out of high-traffic areas.
• Consider professional help: A glass specialist may advise if a small edge chip can be polished or if replacement is the better option.
• Replacement is common: With decorative or crushed diamond mirrors, cracks are often visible even after repair. Many customers choose to replace the glass or the mirror entirely.
• Check policies: Review the product’s return/warranty info and packaging. If replacement is needed, keeping original materials can help with transport.

Always handle cracked glass carefully and consider protective gloves.

Broken mirrors can be sharp, so careful disposal helps protect everyone.

1. Protect yourself: Wear gloves and closed shoes. If available, use eye protection.
2. Tape the surface: Place strips of strong tape in a crisscross pattern over the glass to help contain loose shards.
3. Wrap it up: Wrap the mirror in several layers of newspaper, bubble wrap, or an old towel, then slide it into cardboard (a flattened box works). Secure with tape.
4. Label clearly: Mark the package "Broken glass" so handlers know to be cautious.
5. Check local rules: Waste and recycling guidelines vary. Contact your municipality for proper disposal instructions.

Reusing original packaging, if you still have it, can also help contain the glass during transport.

Working with broken glass can be hazardous, so caution is important. Rather than using sharp shards, many crafters choose safer alternatives that achieve a similar glam look.

• Use pre-cut pieces: Consider pre-cut mirror tiles or peel-and-stick mosaics to create artwork or frame accents without handling broken edges.
• Refresh the frame: If the frame (including crushed crystal detailing) is intact, a professional can often replace just the glass, giving the piece new life.
• Recycle responsibly: If repurposing isn’t a fit, check local recycling or disposal options for glass.

If you do any DIY work with glass, protective gloves and careful handling are essential. When in doubt, professional services can help you achieve the look safely.