ORICO 4 Bay External Hard Drive Docking Station with Offline Clone 2.5/3.5 inch SSD/HDD Docking Station Enclosure USB 3.0 to SATA 5Gbps for PC Laptop- 4*12TB（No Drive)

Dear customer,It's just a hard drive dock, not contain SSD/HDD, if you have any questions after receiving the goods, please feel free to contact us. We will reply to you as soon as possible within 24 hours and we will be happy to serve you.

ORICO USB 3.0 to SATA I/II/III 4 Bay External Hard Drives SATA Enclosure for 2.5 or 3.5 inch HDD, SSD with Hard Drive Duplicator/Cloner Function [4 x 12TB]

Do you also encounter the following problems?
1. The hard drive removed from the old computer is left idle
2. The device capacity is too small and the stored data is insufficient.
3. Using an ordinary cloning dock can only clone one hard drive at a time, which is too inefficient.
4. Purchasing chips from unknown sources will damage the hard drive.

💎ORICO 4-bay cloning HDD docking station turns idle hard drives into treasures and restores the glory of your old hard drives.

📢📢📢NOTE:
1.This product does not include a hard drive.
2.The new hard drive needs to be formatted before use.
3.Please back up your data before cloning, all files on the target hard disk will be overwritten during cloning.
2. To avoid data loss, do not remove or insert the hard drive while the device is running.
3. Please make sure the USB cable is disconnected when using the offline cloning function.
4. After the copy is completed, the target disk needs to be connected to the computer and open Disk Manager - Online before it can be used.

ORICO 4 bay External Hard drive Docking station built with ABS material supports the direct insertion of 2.5"/3.5" SATA I II III Hard Drives. SATA to USB3.0 drive cloner dock station support up to 4x 12TB hard drives. External hard drive enclosure with the USB3.0 super-speed interface, the transfer speed reaches a maximum of 5Gbps and backwards compatible, hard drive docking enclosure is compatible with USB2.0 and USB1.1. The 4 bay hard drives dock station compatible with Windows 7/ 8 /8.1/ 10/ Linux/ Mac 9.1/10.2 or higher. The Open-type tool-free design with non-slip feet on the bottom hard drive cloner, the hard drive is more stable and has better heat dissipation. SSD/HDD docking station for sata drives, Supports hot-swapping,plug and Play, No Driver Needed. Hard drive dock equipped with 12V 6A power adapter with Over-current, short-circuit, leakage, over-voltage safety protection module, do not have to worry about accidental loss of data, so you can use the peace of mind.

Product parameters
Model: ORICO-6648US3-C-V1
Product interface: USB3.0 Type-B
Size: 144*81*217mm
Weight: 1500g
Installation method: Tool-free

What is in the box:
1 x ORICO 4 Bay Hard Drive Docking Station
1 x USB3.0 data cable*1 (100cm)
1 x 12V 6A power adapter*1(100cm)
1 x User Manual