ProTech300 Outdoor Wood Boiler Water Treatment, 1 Gallon

ProTech 300 Boiler Treatment - Has been designed to be used in boiler treatment systems at a lower cost. These outdoor wood boiler systems insist the boiler owner meet certain nitrite levels in order to comply with warranty requirements in regards to boiler corrosion protection. Adding 1 gallon of ProTech 300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite. Suggested nitrite levels are: 750ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great. Dose system accordingly on required control levels set by your boiler manufacturer and your system's nitrite need based on test results. Do it yourself test kits are available, see the ProTech 300 Test Kit. The manufacturers can't tell the difference if you're using their expensive brand or our ProTech 300, so you can send it into their labs to be tested without worry. ProTech 300 Boiler Treatment will: Protect your wood boiler from rust, corrosion, and scale. Balance pH and alkalinity. This product meets or exceeds all boiler manufacturer nitrite warranty requirements. Typical applications are outdoor wood furnaces and boilers. Protech 300 wood boiler water treatment is an inexpensive alternative to brand-name boiler treatment chemicals at half the cost and offers better protection. In Fact it Offers 3 Levels of protection and is the only product to do so. ProTech 300 Protects Cast Iron, Steel and Stainless Steel, and one gallon can treat up to 300 gallons. Why pay more? Shaver Wood Furnace and many other companies recommends this product Only!