ShelterLogic Max AP 10' x 20' Canopy Enclosure Kit with Windows (Frame and Canopy not included)

This worked pretty well with the maxap 10 by 20 canopy and frame kit. If you need the bungy cords to be shorter, just tie a knot in the middle, makes it a bit tighter. Instructions are adequate, not great, but pretty self evident after assembling the canopy and frame setup. Just make sure your frame is square, otherwise you will have problems with trying to overstretch the canopy pieces. Wish there was a way to "hold up" the zip open door for putting your auto in there! Oh well, will probably do a little "customizing" with Velcro or something later. All in all, windows let in a ton of light and it does cut way down on the wind/cold with the walls up, probably about 15 degrees difference on a 40-something day, much more comfortable. We will see how will it holds up to winter's ravages, hoping! Used concrete anchors on concrete for the canopy frame, and used riebar driven through the "temporary anchors", which were metal, driven through the plastic feet at an angle. Hope the plastic feet hold up. Did drill and run screws in every joint of the metal frame that came with the canopy kit, which does not come with this, it is just the enclosure. Just a few tips on the canopy stuff mixed in here. The buy online and pickup in store was 2 days late, but had to make a 2nd in trip into town in any case, so not too bad. came in in good shape, no broken, or torn components.