Wet Sounds - Two Pairs Of RECON 6-XWW White 6.5" Speakers And A Kicker KXMA400.4 Marine Amplifier

This bundle includes two pairs of Wet Sounds RECON 6 XW-W Recon Series 6.5" 60-Watt RMS Coaxial Speakers With White XW Grilles, and a Kicker KXMA4004 KXMA400.4 4x100-Watt Four-Channel Full-Range Class D Amplifier.
Wet Sounds RECON 6 XW-W Recon Series 6.5" Coaxial speakers With White XW Grille And Cone (Pair)

The RECON 6 XW-W features a White grille and White injection molded composite cone with Wet Sounds proprietary rubber spider and surround, Nylas frame/grille. And Horn Flare ¾ inch aluminum tweeter and rubber magnet boot.

Features -
• 6.5” Component Style Coaxial Speaker
• ¾” Aluminum Dome Tweeter
• Injection Molded Composite Cone
• Santoprene Spider & Surround
• Nylas Nylon/Fiberglass Frame
Specifications -
• Impedance: 4 ohms
• RMS Watts: 60
• PEAK Watts: 120
• Frequency Response: 40Hz to 20Khz
• Sensitivity: 89db at 1watt / 1meter
• Diameter: 6.8 inches w/grill (172.72 mm)
• Mounting Depth: 2.6 inches (60.04mm)
• Hole Cut Out:
• 5.0 inches (127mm)

KXMA400.4 Amplifier

The KXM 400-watt four-channel amplifier is flexible enough to be a full system solution, or serve as the power for your mid and high-range speakers. KickEQ+™ delivers as much as an 18dB of extra bump with a simple turn of the knob, and powerful 24dB crossover is also included to letting you quickly tune your system to perfection.

Class D Power Plant
Gain Control With "Optimal Input" Indicator
FIT2™ (Fail-Safe Integration Technology) Circuitry
Conformal-Coated Circuit Boards
Stainless Steel Mounting Hardware Included

Specifications
RMS Power [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4
@ 14.4V, 4Ω mono, ≤ 1% THD+N: 200 x 2
Length [in, cm]
11-3∕16 , 28.4
Height [in, cm]
2-⅛, 5.5
Width [in, cm]
8-5⁄16 , 21
Frequency Response [Hz]
10Hz–20kHz
Input Sensitivity:
250mV–10V
Signal-to-Noise Ratio
95dB