Unique Bargains 10pcs 256mil 10.6sqft Car Butyl Foam Heat Sound Damping Mat Pad

You are made of butyl material for heat resistance. This material eliminates vibrations and reduces the vehicle's general noise and rattle, allowing for higher comfort. Self-adhesive sound-dampening material is easy to install. It is designed in a handy size which makes it easier in terms of cutting. Block transmission sunlight, engine, and exhaust pipe heat to the cab, reducing air conditioning energy consumption. Specification: Color: Silver Tone, Material: Butyl, Foam, Aluminium Foil, Total Coverage Area: 10. 6sqft, Thickness: 6. 5mm/256mil, Size: 400x250mm / 15. 7x9. 8-inch, Installation: Decide what part you want to insulate first: car roof, car floor, car doors, or a hood. Remove the factory insulation once you have dismantled the interior. Properly clean and degrease the surface before installation of the mat. Measure the pre-cleaned surface of the prospective spot that you are going to treat. Try to locate the piece of material onto the prospective surface of a car without removing the adhesive paper. When your sheet is ready to use, lay that down on the surface and let it stick. Flatten the sheet with your hands to avoid air bubbles. Use a roller for rolling down the foil as a neat step. Installation Notices: Please clean the surface you want to. You could heat it to make it soft, then compact it by hand if the room temperature is below 5 degrees Celsius, first lamp heating it until soft. It would be good to wear protection when working. Package Includes 10 x Heat Sound Deadener Insulation Mat.