Tomcat Mole Killer Grubs

Ingredients

Directions: Instructions: 1. Identify surface runways - brown, grassless streaks on a lawn - created when moles tunnel below. 2. Carefully poke a hole in the top of the surface runway with your index finger. Be sure not to collapse the pile or cover up the hole. Mark the hole with a small stick. Repeat with several runway locations. 3. Wait 48 - 72 hours and then check holes to see if they have been sealed. Sealed holes are active and can be baited. 4. Bait only active runways. Poke a hole 3 to 5 feet on either side of the assessment hole and place two grubs (one placement) down each hole. Push grubs as far down as you can. Make sure each grub is sitting on the floor of the runway. 5. Reseal the runway with dirt to keep out any light and pinch hole closed or cover it with a piece of sod or small rock. 6. Wait 5 to 7 days after application and check for mole activity using the same process in Step 2. If the holes stay open for 48 -72 hours, the mole has likely traveled the runway and eaten the bait.