T-Bird Power Rack & Pinion Fittings, AN6, Stainless Steel

Manufactured from 316 stainless steel and precision machined for perfect fit. Designed to fit popular Ford Thunderbird (’82-’88) and Mustang II power steering racks. Converts rack’s pressure and return ports to AN6 for custom power steering hoses. Designed for use with aftermarket or custom built AN6 high-pressure hose kits. Sold as a pair of AN power steering fittings with O-ring seals pre-installed. Stop Fighting Power Steering Hose Issues, Convert to AN Hose Easily with Our Fittings The late-model Ford rack-and-pinion steering gear assembly is a popular solution in the IFS conversion and hot rod worlds. These steering racks, commonly referred to as the “T-Bird rack” by enthusiasts were found on popular “Fox” chassis Ford cars in the 1980s through the early 1990s, including the Mustang, Capri, Thunderbird, Cougar, and others. Today, we offer a brand new T-Bird-style steering rack so you don’t have to fight rusty hardware in a junkyard or gamble on a reman at your local parts store of questionable build quality. Even with a new rack in hand, the second issue is plumbing the rack to your choice of accessory drive/power steering pump. Often the factory Ford hoses will not work with your power steering pump or may be too long or even too short. Your best option is to use high-pressure AN6 hose or a custom braided hose kit to plumb your power steering system. But how to connect these AN hose to your rack’s OE fluid ports? Our stainless steel AN power steering fittings are the best answer and feature better sealing with tighter tolerances than other low-cost adapters on the market. Designed to fit the “Fox” T-Bird rack, as well as the Mustang II-style power steering rack that uses 9/16-18 and 5/8-18 threaded ports, these AN power steering fittings are huge time savers and allow for custom power steering lines specific to your build/chassis to easily be connected.