Silver Hand Grips 7/8" 22mm Suzuki GSXR Honda CBR Kawasaki Ninja Yamaha R6 R1

1 Pair - Silver CNC Aluminumwith Black Hand Grips
1x Throttle Side - 1x Clutch Side - 7/8 Inch Diameter Handlebars

These grips are made of a strong rubberized material that increases grip for easy and accurate throttle control, stands up to constant abuse, and is treated to reduce UV damage. The Bar Ends are attached with Bolt and Nut and are otherwise closed ended grips. Bar Ends can be removed and replaced with others, but this would require the grip to be modified to accommodate a different Bar End application. Add these OEM Replacement grips to your bike and stand out from the others!

Stats:
Name: Zeus
Dimensions: Multiple, please see photo(s) for approximate measurements
Housing: Black Rubberized Compression Fit
Aluminum: Silver CNC Billet Rings and Bar Ends
Fitment: 7/8 Inch Diameter Handlebars

Install Notes: When you open the package you will notice that one grip has a larger inner diameter than the other. The larger inner diameter grip is for the Throttle side (right side), while the smaller inner diameter is for the Clutch side (left side). Remove your old grips from the handlebar. Then clean all of the glue and dirt residue from the throttle plastic and the handlebar. You will not use glue to install our hand grips because they are designed with a compression fit. To slide them on easier, we recommend warming them up and using warm soapy water or glass cleaner; these liquids will evaporate upon drying. Do not use petroleum based lubricants as they will leave a slick residue, allowing the grip to slide off easily while riding. Do not use compressed air or a screwdriver to install as this could result in blowing out the side or damaging the graphics. Once applied and your happy with them you may want to install Bar Ends. If so, you will have to modify the grips by cutting the end out; by modifying you void the ability to return the product. To Start, we recommend using a sharp X-Acto knife. With the grips installed, simply stick the blade into the end of the grip and use the inner wall of the Handlebar as a guide to cut the end out (do not cut from the side, top to bottom). Your cutting the end out,NOT cutting the end off. Additional trimming may be required to facilitate proper Throttle Control with Bar Ends installed. Verify throttle response before riding.