Shurtape AF-075 Military-Grade Aluminum Foil Tape: 2 in x 60 yds. (Silver)

Shurtape AF-75 Military-Grade Aluminum Foil Tape is a 3 mil dead-soft linerless aluminum foil tape which is designed to resist extreme temperature fluctuations. It adheres to its own backing and also particularly well on irregular surfaces. Used to create vapor barriers and waterproof seals, to reflect and dissipate heat, and for masking off areas when painting and electroplating. The tape is coated with an aggressive acrylic adhesive and meets the L-T-80B, NRC Guide 1.38, SAE-AMS-T-23397, and MIL-T-23397C (replaced MIL-T-23397B - canceled 9/21/98) standards. Please note AF-075 typically ships on a plain white core (not Shurtape branded-core). Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: dead soft aluminum foil
- Adhesive: acrylic-based
- Thickness: 4.8 mils (carrier, adhesive) 1.8 mils (adhesive) 3 mils (carrier)
- Adhesion: 55 ounces per inch (to stainless steel test panel)
- Tensile Strength: 30 pounds per inch (longitudinal)
- Service/Operating Temperature: -30F to 325F
- Elongation: 5.3 %