Shurtape PE-333 Economy Stucco Masking Film Tape: 4 in x 60 yds. (Red with Serrated edge)

Shurtape PE-333 Stucco Masking Film Tape is a non-UV-resistant polyethylene film tape used to mask surfaces, such as windows and doors, during stucco application and painting, as well as for seaming underslab vapor barriers and holding poly-sheeting when building containments. Designed with a special, high-tack synthetic adhesive, PE 333 maintains a watertight seal, even in severe environments and weather conditions, and removes cleanly when the job is done.

Features & Benefits

• Non-UV-resistant polyethylene film tape.
• Excellent conformability.
• Maintains a watertight seal.
• Removes cleanly.
• Available with serrated/pinked or straight edges.

Made in Canada. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: polyethylene (PE) film
- Adhesive: rubber
- Thickness: 7 mils (carrier, adhesive)
- Adhesion: 70 ounces per inch (to stainless steel test panel)
- Tensile Strength: 19 pounds per inch (longitudinal)
- Service/Operating Temperature: 32F to 160F
- Elongation: 80 %
- Water Vapor Transmission Rate: 0.4 gram/100 sq inch/24 hour