SHANNA 3KW 220V Electric Water Heater Swimming Pool Thermostat SPA Bath Heater Pump

Description:
The Electrical pool heater is designed specifically for the needs of the Jacuzzi. The thermostat can keep the water temperature between 20℃-40℃(68℉-104℉) adjustable, set a most comfortable bath temperature. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use.

Specifications:
Material: Metal
Voltage: AC 220-240 V / 50-60 Hz
Power: 3 KW
Current: 14 A
Wire:0.12" x 0.16" ( 3 x 4 mm² )
Pipe Dimeter: 1" (2.54 cm )
Size: 10.4" x 4.9" x 4.9"(264 x 125 x 125 mm)
Net Weight: 4.4 lbs (2 kg)
Phase Parameters: Single Phase
Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment

Note:
Do not place any electrical appliances within 1.5 meters of the thermostat.
Do not use the thermostat in saltwater, acid water, or alkaline water.
Do not use a thermostat where chemically aggressive gases or solvents.
Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves.
Temperature heaters should be used with 500W or higher circulating water pumps for normal use.
Please use it along with the circulating water pump of different specifications, rather than alone.
Do not use it without water. It must be connected to the pool with water for use.
It is assembled with cable wire, but without a plug, so the power cord is needed.
As the power is high, you'd better use it with independent sockets, rather than the plug board.

Package Included:
1* Pool Thermostat